SPECIFICATIONS


1.0L Engine

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter 3.3 Quarts / 3.1 Liters The use of SAE 0W-30 ACEA C2 I API SN grade totally synthetic lubricant is recommended. FIAT 9.55535- GS1 qualification or MS.90048 68291576AB 68291576GA
Cooling System * 7.3 Quarts / 6.9 Liters The use of red protective agent with antifreeze action based on inhibited monoethylene glycol with organic formula is recommended. Passes CUNA NC 956-16, ASTM D 3306 specifications. FIAT 9.55523 or MS.90032 qualification. 68163848AB —
Fuel Selection 12.7 Gallons / 48 Liters Unleaded petrol 95 R.O.N. (EN228 specifications). — —
Spark Plugs GAP NGK ILKFR7A8. — —
0.026 in / 0.65 mm
* Includes heater and coolant reservoir filled to MAX level.

1.3L Engine

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter 4.5 Quarts / 4.3 Liters We recommend you use SAE 0W-30 SN PLUS API Certified Synthetic Engine Oil, meeting the requirements of FCA Material Standard MS-13340 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. 68291576AB 68291576GA
Cooling System * 8.8 Quarts / 8.3 Liters We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of FCA Material Standard MS.90032. 68163848AB 68163848GB
Fuel Selection 12.7 Gallons / 48 Liters 87 Octane (R+M)/2, 0-15% Ethanol. — —
Spark Plugs GAP We recommend you use Mopar Spark Plugs. — —
0.026 in / 0.65 mm
* Includes heater and coolant reservoir filled to MAX level.

1.4L Engine

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter 4 Quarts / 3.8 Liters We recommend you use API Certified SAE 5W-40 Full Synthetic Engine Oil, meeting the requirements of Material Standard MS-12991. Refer to your engine oil filler cap for correct SAE grade. 5127394PC 68231020GA
Cooling System * 5.5 Quarts / 5.2 Liters We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of FCA Material Standard MS.90032. 68163848AB 68163848GB
Fuel Selection 12.7 Gallons / 48 Liters 91 Octane Recommended, 87 Octane Acceptable, 0-15% Ethanol — —
Spark Plugs GAP We recommend you use Mopar Spark Plugs. — —
0.023 - 0.027 in / 0.6 - 0.7 mm
* Includes heater and coolant reservoir filled to MAX level.

2.4L Engine

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter 5.5 Quarts / 5.2 Liters We recommend you use SAE 0W-20 API Certified Engine Oil, meeting the requirements of FCA Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. 68291576AA N/A
Cooling System * 6.8 Quarts / 6.5 Liters We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of FCA Material Standard MS.90032. 68163848AB 68163848GB
Fuel Selection 12.7 Gallons / 48 Liters 87 Octane, 0-15% Ethanol. — —
Fuel Selection - Flex Fuel (E-85) 12.7 Gallons / 48 Liters 87 Octane, Up To 85% Ethanol. — —
Spark Plugs GAP We recommend you use Mopar Spark Plugs. — —
0.026 in / 0.65 mm
* Includes heater and coolant reservoir filled to MAX level.

1.6L Diesel Engine

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter - With AdBlue 5.0 Quarts / 4.8 Liters The use of SAE OW-2O ACEA C2 grade totally synthetic lubricant is recommended. FIAT Classification 9.55535-DSX N/A N/A
Engine Oil With Filter - Without AdBlue 5.0 Quarts / 4.8 Liters The use of SAE 0W-30 ACEA C2 grade totally synthetic lubricant is recommended. FIAT 9.55535-DS1 qualification or MS.90047 68291576AB 68291576GA
Cooling System * 6.4 Quarts / 6.1 Liters The use of red protective agent with antifreeze action based on inhibited monoethylene glycol with organic formula is recommended. Passes CUNA NC 956-16, ASTM D 3306 specifications. FIAT 9.55523 or MS.90032 qualification. 68163848AB 68163848GB
Fuel Selection 14.5 Gallons / 55 Liters Diesel for motor vehicles (EN590 Specification). — —
AdBlue 3.4 Gallons / 13 Liters Use of a diesel emissions additive in water-AdBlue (Urea) solution is recommended. DIN 70 070 and ISO 22241-1 specifications 68035704AC N/A
* Includes heater and coolant reservoir filled to MAX level.

2.0L Diesel Engine

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter - With AdBlue 5.0 Quarts / 4.8 Liters For best performance and maximum protection under all types of operating conditions, the manufacturer recommends SELENIA WR FORWARD engine oils, or equivalent, API Certified SAE 0W-20 that meet the requirements of FCA Material Standard 9.55535-DSX and ACEA C2.

NOTE: If lubricants compliant with the required specifications are not available, products that comply with the minimum required characteristics can be used for topping off; in this case optimal performance of the engine is not guaranteed. The use of products with specifications other than those indicated above could cause damage to the engine not covered by the warranty.
N/A N/A
Engine Oil With Filter - Without AdBlue 5.0 Quarts / 4.8 Liters For best performance and maximum protection under all types of operating conditions, the manufacturer recommends SELENIA WR FORWARD engine oils, or equivalent, API Certified SAE 0W-30 that meet the requirements of FCA Material Standard 9.55535-DS1 or MS.90047 and ACEA C2.

NOTE: If lubricants compliant with the required specifications are not available, products that comply with the minimum required characteristics can be used for topping off; in this case optimal performance of the engine is not guaranteed. The use of products with specifications other than those indicated above could cause damage to the engine not covered by the warranty.
N/A 68291576GA
Cooling System * 6.9 Quarts / 6.5 Liters CUNA NC 956-16 ASTM D3306 9.55523. 68163848AB 68163848GB
Fuel Selection 14.5 Gallons / 55 Liters Diesel for motor vehicles (EN590 Specification). — —
* Includes heater and coolant reservoir filled to MAX level.

A/C Refrigerant System

Description Capacities Type Part Number Global Part Number
Refrigerant - 1.0L and 1.3L - Before 3/14/19 (1.0L) and 3/15/19 (1.3L) 0.92 Pounds / 0.420 Kilograms Use only refrigerant R-1234yf 68224028AB 68224028GA
Refrigerant - 1.0L and 1.3L - On and After 3/14/19 (1.0L) and 3/15/19 (1.3L) 0.88 Pounds / 0.400 Kilograms Use only refrigerant R-1234yf 68224028AB 68224028GA
Refrigerant - 1.4L Gas, 1.6L Diesel, 2.0L Diesel, and 2.4L Gas 1.0 Pounds / 0.450 Kilograms Use only refrigerant R-1234yf 68224028AB 68224028GA
Refrigerant Oil - ND-12 PAG oil 68224150AB 68224150GB
Refrigerant Oil - PS-D1 PAG oil 68232939AB 68232939GB

TRANSMISSION

Description Type Capacity Part Number Global Part Number
U.S. Metric
948TE Automatic Transaxle Use only Mopar ZF 8&9 Speed ATF Automatic Transmission Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. 6.35 Quarts 6.0 Liters 68218925AA 68218925GA
948TE Overhaul Fill (Refer to 21 - Transmission and Transfer Case/Automatic - 948TE/FLUID and FILTER/Standard Procedure) .
♦C635 DDCT Automatic Transaxle Gearbox: Full synthetic 75W-85 manual transmission fluid meeting MS.90030-M2 and the API GL4 specification. 2.2 Quarts 2.1 Liters 68092630AA 68092630GA
Control System: Use only MOPAR C Series DDCT SAE 75W Hydraulic Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. 0.95 Quarts 0.9 Liters 68092638AB 68092638GA
C630 & C635 Manual Transaxle The use of SAE 75W API GL4 grade synthetic lubricant is recommended. FIAT 9.55550-MZ6 or MS.90030-M1 qualification 2.0 Quarts 1.88 Liters 68092630AA 68092630GA
C510 - Service Fill Mopar C635 DDCT/MTX Transmission Fluid 2.1 Quarts 2 Liters 68092630AA 68092630GA
♦ For the C635 fluid level inspection, (Refer to 21 - Transmission and Transfer Case/Manual/FLUID - Standard Procedure) .

CHASSIS

Description Type Capacities Part Number Global Part Number
U.S. Metric
Axles
Rear Differential (RDM) We recommended you use Mopar Rear Axle/RDM Synthetic Axle Lubricant SAE 75W-90 (API GL-5). 0.63 Quarts 0.6 Liters 68280933AA 68280933GA
Transfer Case
Power Transfer Unit (PTU) We recommended you use Mopar Front Axle/PTU Synthetic Axle Lubricant SAE 75W-90 (API GL-5). 0.42 Quarts 0.4 Liters 68280932AA 68280932GA
Chassis Systems
Brake Master Cylinder We recommend you use Mopar DOT 4. If DOT 4 brake fluid is not available, then DOT 3 is acceptable. DOT 4 brake fluid must be changed every 2 years regardless of mileage. N/A N/A 04549625AD 04549625GD