|
♦ Engine Coolant (3.0L
Diesel Engines)
|
Mopar Engine Coolant/ Antifreeze 10 Year/150,000 Mile Formula OAT
(Organic Additive Technology)
|
11.6 Quarts
|
11.0 Liters
|
68163848AB
|
68163848GB
|
|
♦ Engine Coolant (3.6L
Engine)
|
Mopar Engine Coolant/
Antifreeze 10 Year/150,000 Mile Formula OAT (Organic Additive Technology)
|
13.7 Quarts
|
13 Liters
|
68163848AB
|
68163848GB
|
|
♦ Engine Coolant (5.7L
Engines - 1500 Models)
|
Mopar Engine Coolant/
Antifreeze 10 Year/150,000 Mile Formula OAT (Organic Additive Technology)
|
18.3 Quarts
|
17.3 Liters
|
68163848AB
|
68163848GB
|
|
♦ Engine Coolant (5.7L
Engines - 2500/3500 Models)
|
Mopar Engine Coolant/
Antifreeze 10 Year/150,000 Mile Formula OAT (Organic Additive Technology)
|
18.3 Quarts
|
17.3 Liters
|
68163848AB
|
68163848GB
|
|
♦ Engine Coolant (2500/3500
Models w/ Heavy Duty)
|
Mopar Engine Coolant/
Antifreeze 10 Year/150,000 Mile Formula OAT (Organic Additive Technology)
|
19.2 Quarts
|
18.2 Liters
|
68163848AB
|
68163848GB
|
|
♦ Engine Coolant (6.4L Engine)
|
Mopar Engine Coolant/
Antifreeze 10 Year/150,000 Mile Formula OAT (Organic Additive Technology)
|
16.6 Quarts
|
15.7 Liters
|
68163848AB
|
68163848GB
|
|
♦ Engine Coolant (6.7L
HO Diesel Engines)
|
Mopar Engine Coolant/
Antifreeze 10 Year/150,000 Mile Formula OAT (Organic Additive Technology)
|
22.6 Quarts
|
21.4 Liters
|
68163848AB
|
68163848GB
|
|
Engine Oil with
Filter
|
|
Engine Oil (3.0L Diesel)
|
We recommend you use 5W-40
synthetic engine oil such as Mopar or Shell Rotella that meets FCA
Material Standard MS-10902 and the API CJ-4 or ACEA E9/E7 or ACEA
A3/B4 engine oil category is required.
|
10.5 Quarts
|
10 Liters
|
68001332PB
|
68231021GB
|
|
Engine Oil (3.6L Engines)
|
We recommend you use
API Certified SAE 5W-20 Engine Oil, meeting the requirements of FCA
Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix.
Refer to your engine oil filler cap for correct SAE grade. Mopar SAE
5W-30 engine oil approved to Material Standard MS-6395 may be used
when SAE 5W-20 engine oil meeting MS-6395 is not available.
|
6 Quarts
|
5.6 Liters
|
68218890AB
|
68218890GB
|
|
Engine Oil (5.7L Engine)
|
We recommend you use
API Certified SAE 5W-20 Engine Oil, meeting the requirements of Material
Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to
your engine oil filler cap for correct SAE grade.
|
7 Quarts
|
6.6 Liters
|
68218890AB
|
68218890GB
|
|
Engine Oil (5.7L Engine
2500/3500 trucks operating under a gross combined weight rating greater
than 14,000 lbs/(6,350 kg.))
|
We recommend you use
API Certified SAE 5W-30 Engine Oil, meeting the requirements of Material
Standard MS-6395 such as Mopar, Pennzoil, Shell Helix or equivalent.
Refer to your engine oil filler cap for correct SAE grade.
|
7 Quarts
|
6.6 Liters
|
68218920AB
|
68218920GB
|
|
Engine Oil (6.4L Engines)
|
For best performance and maximum protection under all types
of operating conditions, the manufacturer only recommends full synthetic
engine oils that meet the American Petroleum Institute (API) categories
of SN. The manufacturer recommends the use of Pennzoil Ultra 0W-40
or equivalent Mopar engine oil meeting the requirements of Material
Standard MS-12633 for use in all operating temperatures.
|
7 Quarts
|
6.6 Liters
|
68171066PB
|
68171066GA
|
|
Engine Oil (6.7L HO
Diesel Engines)
|
In ambient temperatures
below 0°F (-18°C), We recommend you use 5W-40 synthetic engine oil
such as Mopar, Shell Rotella and Shell Rimula that meets US Material
Standard MS-10902 and the API CJ-4 engine oil category is required.
In ambient temperatures above 0°F (-18°C), We recommend you use
15W-40 engine oil such as Mopar, Shell Rotella and Shell Rimula that
meets US Material Standard MS-10902 and the API CJ-4 engine oil category
is required.
|
12 Quarts
|
11.4 Liters
|
68001332PB
|
68231021GB
|
|
Fuel Selection
|
|
Fuel Selection (3.6L Engine)
|
87 Octane, 0-15% Ethanol
|
—
|
—
|
|
Fuel Selection (3.6L Flex Fuel E-85 Engine)
|
87 Octane, Up
To 85% Ethanol
|
—
|
—
|
|
Fuel Selection (5.7L/6.4L Engines)
|
89 Octane Recommended
- 87 Octane Acceptable, 0-15% Ethanol
|
—
|
—
|
|
Fuel Selection (6.7L Diesel Engine)
|
Use good quality
diesel fuel from a reputable supplier in your vehicle. Federal law
requires that you must fuel this vehicle with Ultra Low Sulfur Highway
Diesel fuel (15 ppm Sulfur maximum) and prohibits the use of Low Sulfur
Highway Diesel fuel (500 ppm Sulfur maximum) to avoid damage to the
emissions control system. For most year-round service, No. 2 diesel
fuel meeting ASTM specification D-975 Grade S15 will provide good
performance. If climatized or diesel Number 1 ULSD fuel is not available,
and you are operating below (20°F/-6°C), in sustained arctic conditions,
Mopar Premium Diesel Fuel Treatment (or equivalent) is recommended
to avoid gelling. This vehicle is fully compatible with biodiesel
blends up to 5% biodiesel meeting ASTM specification D-975. Pickup
models, and Chassis Cab models configured with optional B20 capability,
are additionally compatible with 20% biodiesel meeting ASTM specification
D-7467.
|
—
|
—
|
|
Fuel Selection (3.0L Diesel
Engine)
|
Use good quality diesel fuel from a reputable supplier in your
vehicle. Federal law requires that you must fuel this vehicle with
Ultra Low Sulfur Highway Diesel fuel (15 ppm Sulfur maximum) and prohibits
the use of Low Sulfur Highway Diesel fuel (500 ppm Sulfur maximum)
to avoid damage to the emissions control system. For most year-round
service, No. 2 diesel fuel meeting ASTM specification D-975 Grade
S15 will provide good performance. We recommend you use a blend of
up to 5% biodiesel, meeting ASTM specification D-975 with your diesel
engine.This vehicle is compatible with biodiesel blends greater than
5% but no greater than 20% biodiesel meeting ASTM specification D-7467
provided the shortened maintenance intervals are followed as directed.
|
—
|
—
|
|
Fuel Filters
|
|
Fuel Filters (3.0L Diesel Engine)
|
We recommend you use Mopar Fuel Filter. Must meet 3 micron rating.
Using a fuel filter that does not meet the manufacturers filtration
and water separating requirements can severely impact fuel system
life and reliability.
|
—
|
—
|
|
Fuel Filters (6.7L Diesel Engine)
|
We recommend you use Mopar Fuel Filter. Must meet 3 micron rating.
Using a fuel filter that does not meet the manufacturers filtration
and water separating requirements can severely impact fuel system
life and reliability.
|
—
|
—
|
|
Fuel Capacity
(approximate)
|
|
Description
|
U.S.
|
Metric
|
Part Number
|
Global Part Number
|
|
1500 Regular Cab Shortbed/Crew Quad Cab Models
|
26 Gallons
|
98 Liters
|
—
|
—
|
|
1500 Regular Cab Longbed/Crew Quad Cab Models (Optional)
|
32 Gallons
|
121 Liters
|
—
|
—
|
|
2500/3500 Shortbed Models
|
31 Gallons
|
117 Liters
|
—
|
—
|
|
2500/3500 Longbed Models
|
32 Gallons
|
121 Liters
|
—
|
—
|
|
2500/3500 Standard Cab Longbed Models
|
28 Gallons
|
106 Liters
|
—
|
—
|
|
2500/3500 Crew/Mega Cab Shortbed Models
|
31 Gallons
|
129 Liters
|
—
|
—
|
|
2500/3500 Crew Cab Longbed Models
|
32 Gallons
|
132 Liters
|
—
|
—
|
|
Standard Rear Tank – Chassis Cab Only
|
52 Gallons
|
197 Liters
|
—
|
—
|
|
Optional Midship Tank – Chassis Cab Only
|
22 Gallons
|
83 Liters
|
—
|
—
|
|
Diesel Exhaust Fluid
(DEF)
|
|
6.7L Diesel Engine (2500/3500 Models)
|
Mopar Diesel Exhaust Fluid (API Certified) (DEF) or equivalent that
has been API Certified to the ISO 22241 standard. Use of fluids not
API Certified to ISO 22241 may result in system damage.
|
5.5 Gallons
|
21 Liters
|
68035704AC
|
—
|
|
6.7L Diesel Engine (Chassis Cab Models)
|
Mopar Diesel Exhaust Fluid (API Certified) (DEF) or equivalent that
has been API Certified to the ISO 22241 standard. Use of fluids not
API Certified to ISO 22241 may result in system damage.
|
9 Gallons
|
34 Liters
|
68035704AC
|
—
|
|
3.0L Diesel Engine (All Models)
|
Mopar Diesel Exhaust Fluid (API Certified)
(DEF) or equivalent that has been API Certified to the ISO 22241 standard.
Use of fluids not API Certified to ISO 22241 may result in system
damage.
|
8 Gallons
|
30.3 Liters
|
68035704AC
|
—
|
|
A/C Refrigerant System
|
|
Engine
|
R-134a Capacity
|
R-1234yf Capacity
|
Part Number
|
Global Part Number
|
|
3.0L/5.7L/6.4L
|
539g (1.19 lb.) |
510g (1.13 lb.)
|
R-134a 82300101AC
R-1234yf 68224028AB
|
R-134a 82300101GB
R-1234yf 68224028GA
|
|
3.6L
|
567g (1.25 lb.) |
510g (1.13 lb.)
|
|
6.7L
|
624g (1.38 lb.)
|
—
|
|
A/C Compressor Oil (3.0L/3.6L/5.7L*)
|
–
|
ND-12
|
68224150AB
|
–
|
|
A/C Compressor Oil (5.7L*/6.4L/6.7L)
|
–
|
ND-8
|
82300102AC
|
–
|
|
♦ System fill capacity includes heater and coolant recovery bottle
filled to MAX level.
|
|
* 5.7L engines in 1500 series trucks take R1234yf refrigerant.
5.7L engines in 2500 – 3500 series trucks take R134a refrigerant.
|
|
| CAUTION: |
Nominal refill capacities are
shown. A variation may be observed from vehicle to vehicle due to
manufacturing tolerance and refill procedure.
|
|