SPECIFICATIONS


3.0L Engine

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter 8.5 Quarts / 8.0 Liters We recommend you use 5W-40 synthetic engine oil such as Mopar that meets FCA Material Standard MS-12991 and the API SN engine oil category is required. 68231020AA 68231020GA
Cooling System * Engine: 11.6 Quarts / 11 Liters We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032. 68163848AB 68163848GB
Fuel Selection 26 Gallons / 98.5 Liters Use good quality diesel fuel from a reputable supplier in your vehicle. Federal law requires that you must fuel this vehicle with Ultra Low Sulfur Highway Diesel fuel (15 ppm Sulfur maximum) and prohibits the use of Low Sulfur Highway Diesel fuel (500 ppm Sulfur maximum) to avoid damage to the emissions control system. For most year-round service, No. 2 diesel fuel meeting ASTM specification D-975 Grade S15 will provide good performance. We recommend you use a blend of up to 5% biodiesel, meeting ASTM specification D-975 with your diesel engine. This vehicle is compatible with biodiesel blends greater than 5% but no greater than 7% biodiesel meeting ASTM specification D-7467 provided the shortened maintenance intervals are followed as directed. - -
Diesel Exhaust Fluid (DEF) Tradesman/Rebel Models: 5.14 Gallons / 19.5 Liters Mopar Diesel Exhaust Fluid (API Certified) (DEF) or equivalent that has been API Certified to the ISO 22241 standard. Use of fluids not API Certified to ISO 22241 may result in system damage. 68035704AC -
All Other Models: 5.74 Gallons / 21.7 Liters
* Includes heater and coolant reservoir filled to MAX level.

3.6L Engine

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter 5 Quarts / 4.7 Liters We recommend you use API Certified SAE 0W-20 Engine Oil, meeting the requirements of FCA Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. 68218950AB 68218950GA
Cooling System * Engine: 13.7 Quarts / 13 Liters We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032. 68163848AB 68163848GB
Motor Generator Unit (MGU): 1.8 Quarts / 1.7 Liters
Fuel Selection 1500 Regular Cab Shortbed/Crew Quad Cab Models: 23 Gallons / 87 Liters 87 Octane, 0-15% Ethanol (Do not use E-85). - -
1500 Regular Cab Shortbed/Crew Quad Cab Models: 26 Gallons / 98 Liters
1500 Regular Cab Longbed/Crew Quad Cab Models (Optional): 33 Gallons / 121 Liters
Spark Plugs GAP We recommend you use Mopar Spark Plugs. - -
0.043 in / 1.1 mm
* Includes heater and coolant reservoir filled to MAX level.

5.7L Engine

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter 7 Quarts / 6.6 Liters We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of FCA Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. 68218890AB 68218890GB
Cooling System * Engine: 18.3 Quarts / 17.3 Liters We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032. 68163848AB 68163848GB
Fuel Selection 1500 Regular Cab Shortbed/Crew Quad Cab Models: 23 Gallons / 87 Liters 89 Octane Recommended - 87 Octane Acceptable, 0-15% Ethanol (Do not use E-85). - -
1500 Regular Cab Shortbed/Crew Quad Cab Models: 26 Gallons / 98 Liters
1500 Regular Cab Longbed/Crew Quad Cab Models (Optional): 33 Gallons / 121 Liters
Spark Plugs GAP We recommend you use Mopar Spark Plugs. - -
0.043 in / 1.1 mm
* Includes heater and coolant reservoir filled to MAX level.

6.2L Engine

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter 7.5 Quarts / 7.1 Liters For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SP. The manufacturer recommends the use of Pennzoil Ultra 0W-40 or equivalent Mopar engine oil meeting the requirements of FCA Material Standard MS-12633 for use in all operating temperatures. 68171066PB 68171066GA
Cooling System * Engine: 18.7 Quarts / 17.7 Liters We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032. 68163848AB 68163848GB
Engine Intercooler: 3.75 Quarts / 3.55 Liters
Fuel Selection 33 Gallons / 121 Liters Premium Unleaded 91 Octane Only or Higher (R+M)/2 Method, 0-15% Ethanol (Do Not Use E-85). - -
Spark Plugs GAP We recommend you use Mopar Spark Plugs. - -
0.043 in / 1.1 mm
* Includes heater and coolant reservoir filled to MAX level.

A/C Refrigerant System

Description Charge Amounts Type Part Number Global Part Number
Refrigerant 1.12 Pounds / 510 Grams Use only refrigerant R-1234yf 68224028AA 68224028GA
Refrigerant Oil – 3.6L Engine - FD46XG 05114554AC 05114554GC
Refrigerant Oil – 3.0L Diesel, 5.7L, 6.2L Gas Engine - ND-12 68224150AB 68224150GB
Refrigerant Oil 4.0 oz / 120 ml Total System Fill - -
Refrigerant Oil 1.5 oz / 44 ml A/C Condenser - -
Refrigerant Oil 1.5 oz / 44 ml A/C Evaporator - -
Refrigerant Oil 1.0 oz / 30 ml A/C Receiver/Dryer - -
Refrigerant Oil (Refer to 24 - Heating and Air Conditioning/Plumbing/OIL, Refrigerant/Standard Procedure) . A/C Compressor - -

TRANSMISSION

Description Capacities Type Part Number Global Part Number
Automatic
♦8HP50 9.5 Quarts/ 9 Liters Use only Mopar ZF 8&9 Speed ATF Automatic Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. 68218925AA 68218925GA
♦8HP75 8.98 Quarts/ 8.5 Liters Use only Mopar ZF 8&9 Speed ATF Automatic Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. 68218925AA 68218925GA
♦8HP95 9.5 Quarts/ 9 Liters Use only MoparŪ ZF 8&9 Speed ATF™ Automatic Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. 68218925AA 68218925GA
♦ Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


TRANSFER CASE

Description Capacities Type Part Number Global Part Number
♦ 48-11 Active On-Demand 2-speed Transfer Case (With 4WD AUTO) 3.6 Pints/1.7 Liters We recommend you use Mobil Fluid LT. 68049954AA -
♦ 48-12 Part Time 2-Speed Transfer Case (Without 4WD AUTO) 2.7 Pints/1.3 Liters We recommend you use Shell Spirax S2 ATF A389. 68089195AA -
♦ 48-13 Active On-Demand 2-speed Transfer Case (With 4WD AUTO) 3.8 Pints/1.8 Liters We recommend you use Mobil Fluid LT. 68049954AA -
♦ Approximate dry fill or fill to bottom edge of fill plug hole.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


CHASSIS

Description Capacities Type Part Number Global Part Number
Axles (Front)
Front Axle – Base 2.32 Pints/1.1 Liters We recommend you use Mopar GL-5 Synthetic Axle Lubricant SAE 75W-85. 68232947AA -
Front Axle – TRX 1.8 Pints/0.85 Liters We recommend you use Mopar GL-5 Synthetic Axle Lubricant SAE 75W-85. 68232947AA -
Axles (Rear)
♦ Rear Axle (3.21/3.55) 5.68 Pints/2.69 Liters We recommend you use Mopar Synthetic Gear Lubricant SAE 75W-90 (MS-A0160). 68218655AC -
♦ Rear Axle (3.92) 5.68 Pints/2.69 Liters We recommend you use Mopar Synthetic Gear Lubricant SAE 75W-140 (MS-8985). 68218657AA 68218657GA
Max Tow Rear Axle (3.92) 6.12 Pints/2.9 Liters We Recommend You Use Dana SAE 80W90 Axle Lubricant. 68375248AA -
Chassis Systems
Brake Master Cylinder N/A We recommend you use Mopar DOT 3. If DOT 3 brake fluid is not available, then DOT 4 is acceptable. 04318080AD 04318080GC
♦ Limited-Slip Rear Axles require the addition of 5 oz. (148 ml) Mopar Limited Slip Additive (MS-10111).

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.