SPECIFICATIONS


ENGINE

Description Type Capacities Part Number Global Part Number
U.S. Metric
Cooling System
♦ Engine Coolant (2.4L Engine with Single or Dual-Zone Climate Control System) MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology). 8 Quarts 7.5 Liters 68163848AB 68163848GB
♦ Engine Coolant (2.4L Engine with Three-Zone Climate Control System) 10 Quarts 9.5 Liters 68163848AB 68163848GB
Engine Oil with Filter
♦♦ Engine Oil (2.4L Engine) Use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Material Standard MS-6395 such as MOPAR®, Pennzoil®, and Shell Helix®. Refer to your engine oil filler cap for correct SAE grade. 4.5 Quarts 4.26 Liters 68218890AB 68218890GB
Engine Oil Filter (2.4L Engine) MOPAR® Engine Oil Filter N/A N/A — —
Fuel (approximate)
Fuel Selection (2.4L Engine) 87 Octane, 0-15% Ethanol. FWD - 20.5 Gallons AWD - 21 Gallons FWD - 77.6 Liters AWD - 79.8 Liters — —
A/C Refrigerant System
Refrigerant R-1234yf 20 Ounces - Single 0.595 Kilograms - Single 68224028AB 68224028GA
31 Ounces - Dual 0.879 Kilograms - Dual
♦ System fill capacity includes heater and coolant recovery bottle filled to MAX level.
♦♦ Export - We recommend you use API Certified SAE 5W-20 engine oil, approved to Material Standard MS-6395 or ACEA A1/B1 such as MOPAR, Pennzoil, Shell Helix or equivalent meeting the requirements of MS-6395. Refer to your engine oil filler cap for correct SAE grade. SAE 5W-30 engine oil approved to MS-6395 or ACEA A1/B1 such as MOPAR, Pennzoil, Shell Helix may be used when SAE 5W-20 engine oil is not available.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


SPARK PLUGS

Description Type Gap
U.S. Metric
Spark Plugs (2.4L Engine) MOPAR® 0.043 in 1.10 mm

TRANSMISSION

Description Type Capacities Part Number Global Part Number
U.S. Metric
Automatic
40TE/41TE - Service Fill MOPAR® ATF+4 Automatic Transmission Fluid 4.0 Quarts 3.8 Liters 68218057AB 68218057GB
♦ 40TE/41TE- Overhaul Fill MOPAR® ATF+4 Automatic Transmission Fluid 9.2 Quarts 8.7 Liters 68218057AB 68218057GB
♦ Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


CHASSIS

Description Type Capacities Part Number Global Part Number
U.S. Metric
Axles (Rear)
♦ Rear Driveline Module MOPAR® Gear & Axle Lubricant SAE 75W-90 16.2 Ounces 0.6 Liters 68218655AA 68218655GA
Chassis Systems
Brake Master Cylinder We recommend you use MOPAR DOT 3, SAE J1703. If DOT 3 brake fluid is not available, then DOT 4 is acceptable. N/A N/A 04318080AD 04318080GC
Brake/Clutch Master Cylinder
Power Steering Reservoir We recommend you use MOPAR Power Steering Fluid + 4, or MOPAR ATF+4 Automatic Transmission Fluid. N/A N/A 68218064AB 68218064GB
♦ Approximate dry fill or fill to bottom edge of fill plug hole.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.