Cooling System
|
♦ Engine Coolant (3.6L
Engine)
|
MOPARŽ Antifreeze/Coolant
5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology)
|
1 Gallon - 05066386AA
|
13 Quarts
|
12 Liters
|
♦ Engine Coolant (2.8L
Diesel Engine)
|
MOPARŽ Antifreeze/Coolant
5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology)
|
1 Gallon - 05066386AA
|
13 Quarts
|
12 Liters
|
Engine Oil with Filter
|
♦♦ Engine Oil (3.6L
Engine)
|
MOPARŽ API Certified
SAE 5W-30 engine oil, meeting the requirements of Chrysler Group LLC
Material Standard MS-6395.
|
1 Quart - 0476138AB
|
6 Quarts
|
5.6 Liters
|
4 Quarts - 04761844AB
|
♦♦♦ Engine Oil (2.8L
Diesel Engine)
|
SAE 0W-40 Diesel Engine
Oils confirming to API (American Petroleum Institute) Quality CI-4
or CJ-4. For countries that use the ACEA European Oil Categories for
Service Fill Oils, use engine oils meeting the requirements of ACEA
C3 and approved to MB 229.31 or MB 229.51.
|
1 Quart - 05127394AA
|
7 Quarts
|
6.6 Liters
|
Engine Oil Filter (3.6L
Engine)
|
MOPARŽ Engine Oil Filter
Kit
|
68079744AA
|
N/A
|
N/A
|
Engine Oil Filter (2.8L
Diesel engine)
|
MOPARŽ Engine Oil Filter
|
68032204AB
|
N/A
|
N/A
|
Fuel (approximate)
|
Fuel Selection (3.6L
Engine)
|
87 Octane or higher
Unleaded
|
N/A
|
2 Door - 18.5 Gallons
|
2 Door - 70 Liters
|
4 Door - 22.5 Gallons
|
4 Door - 85 Liters
|
Fuel Selection (2.8L
Diesel Engines)
|
Use only the best quality
fuel with a calculated Cetane Index of 50 or higher. In addition,
the manufacturer recommends using diesel fuel with a sulfur content
of
less than or
equal to 15 ppm.
|
N/A
|
2 Door - 18.5 Gallons
|
2 Door - 70 Liters
|
4 Door - 22.5 Gallons
|
4 Door - 85 Liters
|
A/C Refrigerant System
|
A/C Refrigerant (Single)
|
R-134a
|
82300101AB
|
2.8L Engine – 1.13
Pounds
3.6L Engine – 1.38 Pounds
|
2.8L – 510 grams
3.6L – 624 grams
|
|
♦ System fill capacity
includes heater and coolant recovery bottle filled to MAX level.
|
♦♦ For countries that
use the ACEA European Oil Categories for Service Fill Oils, use the
recommended engine oil that meets the requirements of ACEA C3, and
approved to MB 229.31 or MB 229.51 only. Refer to your engine oil
filler cap for correct SAE grade.
|
♦♦♦ If equipped with
a particulate filter, use SAE 5W-30 Diesel Engine Oils confirming
to API (American Petroleum Institute) Quality CI-4 or CJ-4. For countries
that use the ACEA European Oil Categories for Service Fill Oils, use
engine oils meeting the requirements of ACEA C3 (LOW ASH) and approved
to MB 229.31 or MB 229.51.
|
CAUTION: |
Nominal refill capacities are
shown. A variation may be observed from vehicle to vehicle due to
manufacturing tolerance and refill procedure.
|
|