Cooling System
|
♦ Engine Coolant (3.6L
Engine)
|
MOPARŽ Antifreeze/Coolant
10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting
the requirements of Chrysler Material Standard MS-12106
|
1 Gallon - 68163848AA (concentrate)
68163849AA (50/50)
|
10.5 Quarts
|
9.9 Liters
|
♦ Engine Coolant (2.8L
Diesel Engine)
|
MOPARŽ Antifreeze/Coolant
10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting
the requirements of Chrysler Material Standard MS-12106
|
1 Gallon - 68163848AA (concentrate)
68163849AA (50/50)
|
13 Quarts
|
12 Liters
|
Engine Oil with Filter
|
♦♦ Engine Oil (3.6L
Engine)
|
MOPARŽ API Certified
SAE 5W-20 engine oil, meeting the requirements of Chrysler Group LLC
Material Standard MS-6395 or Fiat 9.55535-CR1.
|
1 Quart - 04761872PA
|
6 Quarts
|
5.6 Liters
|
5 Quarts- 04761851PA
|
♦♦♦ Engine Oil (2.8L
Diesel Engine)
|
SAE 0W-40 Full Synthetic
Engine Oil meeting the requirements of Chrysler Material Standard
MS-10725.
|
1 Quart - 05127394AA
|
7 Quarts
|
6.6 Liters
|
Engine Oil Filter (3.6L
Engine)
|
MOPARŽ Engine Oil Filter
Kit
|
68079744AA
|
N/A
|
N/A
|
Engine Oil Filter (2.8L
Diesel engine)
|
MOPARŽ Engine Oil Filter
|
68032204AB
|
N/A
|
N/A
|
Fuel (approximate)
|
Fuel Selection (3.6L
Engine)
|
87 Octane or higher
Unleaded
|
N/A
|
2 Door - 18.6 Gallons
|
2 Door - 70 Liters
|
4 Door - 22.5 Gallons
|
4 Door - 85 Liters
|
Fuel Selection (2.8L
Diesel Engines)
|
Use only the best quality
fuel with a calculated Cetane Index of 50 or higher. In addition,
the manufacturer recommends using diesel fuel with a sulfur content
of
less than 50
ppm.
|
N/A
|
2 Door - 18.5 Gallons
|
2 Door - 70 Liters
|
4 Door - 22.5 Gallons
|
4 Door - 85 Liters
|
A/C Refrigerant System
|
A/C Refrigerant
|
R-134a
|
82300101AB
|
2.8L Engine – 1.13
Pounds
3.6L Engine – 1.38 Pounds
|
2.8L – 510 grams
3.6L – 624 grams
|
|
♦ System fill capacity
includes heater and coolant recovery bottle filled to MAX level.
|
♦♦ For countries that
use the ACEA European Oil Categories for Service Fill Oils, use the
recommended engine oil that meets the requirements of ACEA C3, and
approved to MB 229.31 or MB 229.51 only. Refer to your engine oil
filler cap for correct SAE grade.
|
♦♦♦ If equipped with
a particulate filter, use SAE 5W-30 Synthetic Low Ash Engine Oil meeting
the requirements of Chrysler Material Standard MS-11106 or Fiat 9.55535-S1
or Fiat 9.55535-S3 and approved ACEA C3.
|
CAUTION: |
Nominal refill capacities are
shown. A variation may be observed from vehicle to vehicle due to
manufacturing tolerance and refill procedure.
|
|