FLUIDS, LUBRICANTS AND GENUINE PARTS


ENGINE

Description Type Part Number Capacities
U.S. Metric
Cooling System
♦ Engine Coolant (3.0L and 3.6L) MOPARŪ Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Chrysler Material Standard MS.90032. 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 10.5 Quarts 9.9 Liters
♦ Engine Coolant (2.8L Diesel Engine) MOPARŪ Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 13 Quarts 12 Liters
Engine Oil with Filter
♦♦ Engine Oil (3.0L and 3.6L) We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of FCA US Material Standard MS-6395 such as MOPAR, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. 1 Quart - 04761872PA 6 Quarts 5.6 Liters
5 Quarts- 04761851PA
♦♦♦ Engine Oil (2.8L Diesel Engine) SAE 0W-40 Full Synthetic Engine Oil meeting the requirements of Chrysler Material Standard MS-10725. 1 Quart - 05127394AA 7 Quarts 6.6 Liters
Engine Oil Filter (3.0L and 3.6L) MOPARŪ Engine Oil Filter Kit 68191349AA N/A N/A
Engine Oil Filter (2.8L Diesel engine) MOPARŪ Engine Oil Filter 68032204AB N/A N/A
Fuel (approximate)
Fuel Selection (3.0L Engine) Research Octane Number (RON) of 91. N/A 2 Door - 18.6 Gallons 2 Door - 70 Liters
4 Door - 22.5 Gallons 4 Door - 85 Liters
Fuel Selection (3.6L Engine) 87 Octane, 0-15% Ethanol. N/A 2 Door - 18.6 Gallons 2 Door - 70 Liters
4 Door - 22.5 Gallons 4 Door - 85 Liters
Fuel Selection (2.8L Diesel Engines) Use only the best quality fuel with a calculated Cetane Index of 50 or higher. In addition, the manufacturer recommends using diesel fuel with a sulfur content of less than 50 ppm. N/A 2 Door - 18.5 Gallons 2 Door - 70 Liters
4 Door - 22.5 Gallons 4 Door - 85 Liters
A/C Refrigerant System
A/C Refrigerant (3.0L and 3.6L) R-134a N/A 1.38 Pounds 0.62 Kilograms
A/C Refrigerant (2.8L) R-134a N/A 1.13 Pounds 0.51 Kilograms
A/C Refrigerant (3.6L) R-1234yf N/A 1.25 Pounds .56 Kilograms
 
♦ System fill capacity includes heater and coolant recovery bottle filled to MAX level.
♦♦ For countries that use the ACEA European Oil Categories for Service Fill Oils, use the recommended engine oil that meets the requirements of ACEA C3, and approved to MB 229.31 or MB 229.51 only. Refer to your engine oil filler cap for correct SAE grade.
♦♦♦ If equipped with a particulate filter, use SAE 5W-30 Synthetic Low Ash Engine Oil meeting the requirements of Chrysler Material Standard MS-11106 or Fiat 9.55535-S1 or Fiat 9.55535-S3 and approved ACEA C3.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


SPARK PLUGS

Description Type Part Number Gap
U.S. Metric
Spark Plugs (3.6L Engine) We recommend you use MOPAR Spark Plugs. SP149125AD (RER8ZWYCB4) 0.043 in 1.10 mm

TRANSMISSION

Description Type Part Number Capacities
U.S. Metric
Automatic
NAG 1 - Service Fill MOPARŪ ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 5.3 Quarts 5.0 Liters
1 Gallon - 05013458AA
♦ NAG 1 - Overhaul Fill MOPARŪ ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 8.1 Quarts 7.7 Liters
1 Gallon - 05013458AA
Manual
♦♦ NSG370 MOPAR Manual Transmission Lubricant meeting the requirements of FCA US Material Standard MS-9224. 1 Quart - 04874464 1.6 Quarts 1.5 Liters
 
♦ Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures.
♦♦ Approximate dry fill or fill to bottom edge of fill plug hole.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


TRANSFER CASE

Description Type Part Number Capacities
U.S. Metric
♦ NV241 MOPARŪ ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 2.1 Quarts 2.0 Liters
1 Gallon - 05013458AA
 
♦ Approximate dry fill or fill to bottom edge of fill plug hole.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


CHASSIS

Description Type Part Number Capacities
U.S. Metric
Axles (Front)
186 FBI (Model 30) - Front Axle MOPAR Gear & Axle Lubricant (SAE 80W-90) (API GL-5). 1 Quart - 04874468 2.1 Pints 1.0 Liters
♦ 216 FBI (Model 44) - Front Axle MOPAR Gear & Axle Lubricant (SAE 80W-90) (API GL-5). 1 Quart - 04874468 2.7 Pints 1.3 Liters
Axles (Rear)
♦/♦♦♦♦ 226 RBI (Model 44) Rear Axle MOPAR Gear & Axle Lubricant (SAE 80W-90) (API GL-5) or equivalent. For trailer towing, use MOPAR Synthetic Gear & Axle Lubricant (SAE 75W-140). Models equipped with Trac-Lok require an additive. 1 Quart - 04874468 4.75 Pints 2.25 Liters
Chassis Systems
♦♦ Brake Master Cylinder MOPARŪ Brake Fluid DOT 3, SAE J1703. 12 oz. Bottle - 04318080AB N/A N/A
32 oz. Bottle - 04318081AB
♦♦ Clutch Master Cylinder MOPARŪ Brake Fluid DOT 3, SAE J1703. 12 oz. Bottle - 04318080AB N/A N/A
32 oz. Bottle - 04318081AB
♦♦♦ Power Steering Reservoir MOPARŪ Power Steering Fluid +4 16 oz. Bottle - 05166226AA N/A N/A
 
♦ Limited-Slip Rear Axles require the addition of 118 ml (4 oz.) MOPARŪ Limited Slip Additive.
♦♦ If MOPARŪ Brake Fluid DOT 3 is not available, then MOPARŪ Brake and Clutch Fluid DOT 4 (04549625AC), is acceptable.
♦♦♦ If MOPARŪ Power Steering Fluid +4 is not available, then MOPARŪ ATF +4 Automatic Transmission Fluid (05013457AA), is acceptable.
♦♦♦♦ If equipped with Trailer Tow package use MOPARŪ Synthetic Gear Lubricant, SAE 75W-140 (04874469AA)

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.