| Description | Capacities | Type | Part Number | Global Part Number | ||
|---|---|---|---|---|---|---|
| Engine Oil With Filter | 5 Quarts / 4.73 Liters |
We recommend
you use Mopar API SN PLUS Certified SAE 5W-30 Full Synthetic Engine
Oil which meets the requirements of FCA Material Standard MS-13340.
If SN PLUS or equivalent oil is unavailable then use SAE 0W-30 ACEA
C2/API SN Full Synthetic Engine Oil which meets the requirements of
FCA Material Standard 9.55535–GS, such as SELENIA DIGITEK.
|
05166241PA | 05166241GA | ||
| Cooling System * | Engine: 10.3 Quarts / 9.7 Liters | We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032. | 68163848AB | 68218041GA | ||
| Intercooler: 3.2 Quarts / 3.0 Liters | ||||||
| Fuel Selection | Two Door (NAFTA): 17.5 Gallons / 66 Liters | 87 Octane (R+M)/2, 0-15% Ethanol. | — | — | ||
| Two Door (Export): 17.5 Gallons / 66 Liters | Minimum 95 Research Octane Number (RON) (EN228 Specifications). | |||||
| Four Door (NAFTA): 21.5 Gallons / 81 Liters | 87 Octane (R+M)/2, 0-15% Ethanol. | |||||
| Four Door (Export): 21.5 Gallons / 81 Liters | Minimum 95 Research Octane Number (RON) (EN228 Specifications). | |||||
| Spark Plugs | GAP | We recommend you use MOPAR Spark Plugs. | — | — | ||
| 0.024 – 0.025 in / 0.60 – 0.65 mm | ||||||
| * Includes heater and coolant reservoir filled to MAX level. | ||||||
| Description | Capacities | Type | Part Number | Global Part Number |
|---|---|---|---|---|
| Engine Oil With Filter | 5 Quarts / 4.73 Liters | We recommend you use API Certified SAE 0W-20 Engine Oil, meeting the requirements of FCA Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. | 68218950AB | 68218950GA |
| Cooling System * | Engine: 11.2 Quarts / 10.6 Liters | We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032. | 68163848AB | 68218041GA |
| Motor Generator Unit (MGU): 1.9 Quarts / 1.8 Liters | ||||
| Battery: 2.5 Quarts / 2.4 Liters | ||||
| Fuel Selection | Two Door (NAFTA): 17.5 Gallons / 70 Liters | 87 Octane, 0-15% Ethanol. | — | — |
| Two Door (Export): 17.5 Gallons / 66 Liters | Minimum 91 Research Octane Number (RON) | |||
| Four Door (NAFTA): 21.5 Gallons / 81 Liters | 87 Octane, 0-15% Ethanol. | |||
| Four Door (Export): 21.5 Gallons / 81 Liters | Minimum 91 Research Octane Number (RON) | |||
| Spark Plugs | GAP | We recommend you use MOPAR Spark Plugs. | — | — |
| 0.043 in / 1.1 mm | ||||
| * Includes heater and coolant reservoir filled to MAX level. | ||||
| Description | Capacities | Type | Part Number | Global Part Number |
|---|---|---|---|---|
| Engine Oil With Filter | 7.5 Quarts / 7.1 Liters | For best performance and maximum protection under all types of operating conditions, FCA only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. FCA recommends the use of Pennzoil Ultra 0W-40 or equivalent Mopar® engine oil meeting the requirements of FCA Material Standard MS-12633 for use in all operating temperatures. | 68171066PB | 68171066GA |
| Cooling System * | 16 Quarts / 15 Liters | We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT coolant conforming to MS.90032. | 68163848AB | 68163848GB |
| Fuel Selection | 21.5 Gallons / 81 Liters | Premium Unleaded 91 Octane Only or Higher (R+M)/2 Method, 0-15% Ethanol (Do Not Use E-85). | — | — |
| Spark Plugs | GAP | We recommend you use MOPAR Spark Plugs. | — | — |
| .043 in / 1.10 mm | ||||
| * Includes heater and coolant reservoir filled to MAX level. | ||||
| Description | Capacities | Type | Part Number | Global Part Number |
|---|---|---|---|---|
| Engine Oil With Filter | 5 Quarts / 4.73 Liters | We recommend you use Fully Synthetic Low Ash 0W-30 engine oils that meet the requirements of FCA Material Standard 9.55535–DS1 and ACEA C2. | 05166241PA | 68218920GA |
| Cooling System * | Engine: 10.1 Quarts / 9.54 Liters | We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032. | 68163848AB | 68218041GA |
| Intercooler: 3.1 Quarts / 2.92 Liters | ||||
| Fuel Selection | Two Door: 17.5 Gallons / 66 Liters | Specification EN590 | — | — |
| Four Door: 21.5 Gallons / 81 Liters | Specification EN590 | |||
| * Includes heater and coolant reservoir filled to MAX level. | ||||
| Description | Capacities | Type | Part Number | Global Part Number |
|---|---|---|---|---|
| Engine Oil With Filter | 9 Quarts / 8.5 Liters | We recommend you use 5W-40 synthetic engine oil such as Mopar that meets FCA Material Standard MS-12991 and the API SN engine oil category is required. | 68231020AA | 68231020GA |
| Cooling System * | Engine: 12 Quarts / 11.4 Liters | We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) or equivalent meeting the requirements of Material Standard MS.90032. | 68163848AB | 68163848GB |
| Fuel Selection | 18.3 Gallons / 69.3 Liters | Use good quality diesel fuel from a reputable supplier in your vehicle. Federal law requires that you must fuel this vehicle with Ultra Low Sulfur Highway Diesel fuel (15 ppm Sulfur maximum) and prohibits the use of Low Sulfur Highway Diesel fuel (500 ppm Sulfur maximum) to avoid damage to the emissions control system. For most year-round service, No. 2 diesel fuel meeting ASTM specification D-975 Grade S15 will provide good performance. We recommend you use a blend of up to 5% biodiesel, meeting ASTM specification D-975 with your diesel engine. This vehicle is compatible with biodiesel blends greater than 5% but no greater than 7% biodiesel meeting ASTM specification D-7467 provided the shortened maintenance intervals are followed as directed. | - | - |
| Diesel Exhaust Fluid (DEF) | 5.1 Gallons / 19.3 Liters | Mopar Diesel Exhaust Fluid (API Certified) (DEF) or equivalent that has been API Certified to the ISO 22241 standard. Use of fluids not API Certified to ISO 22241 may result in system damage. | 68035704AC | - |
| * Includes heater and coolant reservoir filled to MAX level. | ||||
| Description | Charge Amounts | Type | Part Number | Global Part Number | |
|---|---|---|---|---|---|
| Refrigerant | 1.06 Pounds / 482 Grams | Use only refrigerant R-1234yf | 68224028AA | 68224028GA | |
| Refrigerant | 1.19 Pounds / 539 Grams | Use only refrigerant R-134a | 82300101AC | 82300101GB | |
| Refrigerant Oil | – | FD46XG | 05114554AC | 05114554GC | |
| Refrigerant Oil | 5.0 oz / 150 ml | Total System Fill | – | – | |
| Refrigerant Oil | 2.0 oz / 60 ml | A/C Condenser | – | – | |
| Refrigerant Oil | 2.0 oz / 60 ml | A/C Evaporator | – | – | |
| Refrigerant Oil | 1.0 oz / 30 ml | A/C Receiver/Dryer | – | – | |
| Refrigerant Oil | (Refer to 24 - Heating and Air Conditioning/Plumbing/OIL, Refrigerant/Standard Procedure) | A/C Compressor | – | – | |
| Description | Capacities | Type | Part Number | Global Part Number | ||
|---|---|---|---|---|---|---|
| Automatic | ||||||
| ♦8HP50 | 9.5 Quarts/ 9 Liters | Use only Mopar ZF 8&9 Speed ATF Automatic Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. | 68218925AA | 68218925GA | ||
| ♦8HP75 | 8.98 Quarts/ 8.5 Liters | Use only Mopar ZF 8&9 Speed ATF Automatic Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. | 68218925AA | 68218925GA | ||
| Manual | ||||||
| ♦♦AL6 | 4.76 Pints/2.25 Liters | We recommend you use Mopar ATF+4 Automatic Transmission Fluid. | 68218057AB | 68218057GC | ||
| ♦ Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures. | ||||||
| ♦♦ Approximate dry fill or fill to bottom edge of fill plug hole. | ||||||
|
|
||||||
| Description | Capacities | Type | Part Number | Global Part Number | ||
|---|---|---|---|---|---|---|
| ♦ MP1622/MP1622-OR | 3.38 Pints/1.6 Liters | We recommend you use Mopar ATF+4 Automatic Transmission Fluid. | 68218057AB | 68218057GB | ||
| ♦ MP3022C/MP3022C-OR | 3.72 Pints/1.76 Liters | We recommend you use Mopar ATF+4 Automatic Transmission Fluid. | 68218057AB | 68218057GB | ||
| ♦ Approximate dry fill or fill to bottom edge of fill plug hole. | ||||||
|
|
||||||
| Description | Capacities | Type | Part Number | Global Part Number | ||
|---|---|---|---|---|---|---|
| Axles (Front) | ||||||
| 186 FBI (Model 30) - Front Axle | 1.82 Pints/0.86 Liters | We recommend you use Mopar Gear & Axle Lubricant (SAE 75W85)(API GL-5). | 68378949AA | 68378949GA | ||
| 210 FBI (Model 44) - Front Axle | 2.18 Pints/1.03 Liters | We recommend you use Mopar Gear & Axle Lubricant (SAE 75W85)(API GL-5). | 68378949AA | 68378949GA | ||
| Axles (Rear) | ||||||
| 200 RBI (Model 44) Rear Axle | 2.43 Pints/1.15 Liters | MOPAR Synthetic Gear & Axle Lubricant (SAE 75W-140). Models equipped with Trac-Lok require an additive. | 68218657AB | 68218657GB | ||
| 220 RBI (Model 44) Rear Axle – EDL | 3.06 Pints/1.45 Liters | We recommend you use Mopar Gear & Axle Lubricant (SAE 75W85)(API GL-5). | 68378949AA | 68378949GA | ||
| ♦ 220 RBI (Model 44) Rear Axle – T/L | 2.87 Pints/1.36L Liters | We recommend you use Mopar Gear & Axle Lubricant (SAE 75W85)(API GL-5). Models equipped with Trac-Lok Limited Slip Differential require a friction modifier additive. | 68378949AA | 68378949GA | ||
| Chassis Systems | ||||||
| Brake Master Cylinder | N/A | We recommend you use MOPAR DOT 3 Brake Fluid, SAE J1703. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. | 04318080AD | 04318080GD | ||
| Clutch Master Cylinder | N/A | We recommend you use MOPAR DOT 3 Brake Fluid, SAE J1703. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. | 04318080AD | 04318080GD | ||
| Power Steering Reservoir | N/A | We recommend you use MOPAR Electric Steering Pump Fluid | 05154460AA | 05154460GA | ||
| ♦ Limited-Slip Rear Axles require the addition of 70 ml (2.37 oz.) MOPAR® Limited Slip Additive. | ||||||
|
|
||||||