Cooling System
|
♦ Engine Coolant (3.7L and 4.0L Engines)
|
MOPAR® Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology)
|
1 Gallon - 05066386AA
|
14 Quarts
|
13.2 Liters
|
♦ Engine Coolant (2.8L Diesel Engine)
|
MOPAR® Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology)
|
1 Gallon - 05066386AA
|
13 Quarts
|
12 Liters
|
Engine Oil with Filter
|
♦♦/♦♦♦ Engine Oil (3.7L Engine) Domestic and Export Non ACEA
|
MOPAR® API Certified SAE 5W-20 engine oil, meeting the requirements of Chrysler Material Standard MS-6395.
|
1 Quart - 04761872AC
|
5 Quarts
|
4.7 Liters
|
5 Quarts - 04761851AD
|
♦♦♦ Engine Oil (4.0L Engine) Domestic and Export Non ACEA
|
MOPAR® API Certified SAE10W-30 engine oil, meeting the requirements of Chrysler Material Standard MS-6395.
|
1 Quart - 04761839AC
|
5.5 Quarts
|
5.2 Liters
|
5 Quarts - 04761845AD
|
♦♦♦♦ Engine Oil (2.8L Diesel Engine)
|
Use SAE 0W-40 Diesel Engine Oils confirming to API (American Petroleum Institute) Quality CI-4 or CJ-4. For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils meeting the requirements of ACEA C3 and approved to MB 229.31 or MB 229.51.
|
1 Quart - 05127394AA
|
7 Quarts
|
6.6 Liters
|
Engine Oil Filter (3.7L Engine)
|
MOPAR® Engine Oil Filter
|
05184231AA
|
N/A
|
N/A
|
Engine Oil Filter (4.0L Engine)
|
MOPAR® Engine Oil Filter
|
04884899AB
|
N/A
|
N/A
|
Engine Oil Filter (2.8L Diesel engine)
|
MOPAR® Engine Oil Filter
|
5003558AA
|
N/A
|
N/A
|
Fuel (approximate)
|
Fuel Selection (3.7L Engine) Domestic
|
87 Octane, (R + M)/2 method
|
N/A
|
19.5 Gallons
|
73.8 Liters
|
Fuel Selection (3.7L Engine) Export
|
91 Octane
|
N/A
|
19.5 Gallons
|
73.8 Liters
|
Fuel Selection (4.0L Engine) Domestic
|
87 Octane Acceptable - 89 Octane Recommended
|
N/A
|
19.5 Gallons
|
73.8 Liters
|
Fuel Selection (4.0L Engine) Export
|
91 Octane Acceptable - 95 Octane Recommended
|
N/A
|
19.5 Gallons
|
73.8 Liters
|
Fuel Selection (2.8L Diesel Engines)
|
Use only the best quality fuel with a calculated Cetane Index of 50 or higher. In addition, the manufacturer recommends using diesel fuel with a sulfur content of less than or equal to 15 ppm.
|
N/A
|
18.5 Gallons
|
70 Liters
|
A/C Refrigerant System
|
A/C Refrigerant (Single)
|
R-134a
|
82300101AB
|
1.12 Pounds
|
0.510 Kilograms
|
|
♦ System fill capacity includes heater and coolant recovery bottle filled to MAX level.
|
♦♦ SAE 5W-30 engine oil approved to MB 229.31 or MB 229.51 may be used when SAE 5W-20 engine oil is not available.
|
♦♦♦ For countries that use the ACEA European Oil Categories for Service Fill Oils, use the recommended engine oil that meets the requirements of ACEA C3, and approved to MB 229.31 or MB 229.51 only. Refer to your engine oil filler cap for correct SAE grade.
|
♦♦♦♦ If equipped with a particulate filter, use SAE 5W-30 Diesel Engine Oils confirming to API (American Petroleum Institute) Quality CI-4 or CJ-4. For countries that use the ACEA European Oil Categories for Service Fill Oils, use engine oils meeting the requirements of ACEA C3 (LOW ASH) and approved to MB 229.31 or MB 229.51.
|
CAUTION: |
Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.
|
|