|
Cooling System
|
|
♦ Engine Coolant (2.0L Engine)
|
We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile
Formula OAT (Organic Additive Technology) or equivalent meeting the
requirements of FCA Standard MS.90032.
|
9.0 Quarts
|
8.6 Liters
|
68163848AB
|
68163848GB
|
|
♦ Engine Coolant (2.4L Engine)
|
We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile
Formula OAT (Organic Additive Technology) or equivalent meeting the
requirements of FCA Standard MS.90032.
|
7.2 Quarts
|
6.8 Liters
|
68163848AB
|
68163848GB
|
|
♦ Engine Coolant (3.2L Engine)
|
We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile
Formula OAT (Organic Additive Technology) or equivalent meeting the
requirements of FCA Standard MS.90032.
|
10 Quarts
|
9.5 Liters
|
68163848AB
|
68163848GB
|
|
♦ Engine Coolant (2.2L Diesel Engine)
|
We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile
Formula OAT (Organic Additive Technology) or equivalent meeting the
requirements of FCA Standard MS.90032.
|
7.2 Quarts
|
6.8 Liters
|
68163848AB
|
68163848GB
|
|
Engine Oil with Filter
|
|
Engine Oil - (2.0L Engine)
|
We recommend you use Mopar API SN PLUS Certified SAE 5W-30 Full Synthetic
Engine Oil which meets the requirements of FCA Material Standard MS-13340.
If SN PLUS or equivalent oil is unavailable then use SAE 0W-30 ACEA
C2/API SN Full Synthetic Engine Oil which meets the requirements of
FCA Material Standard 9.55535-GS, such as SELENIA DIGITEK.
| CAUTION: |
Failure to use the recommended SN PLUS or equivalent oil can cause
engine damage not covered by the vehicle warranty.
|
|
5 Quarts
|
4.7 Liters
|
05166241PA
|
05166241GA
|
|
Engine Oil - (2.0L
Engine) - Canada
|
We recommend you use
Mopar API SN PLUS Certified SAE 5W-30 Full Synthetic Engine Oil which
meets the requirements of FCA Material Standard MS-13340. If SN PLUS
or equivalent oil is unavailable then use SAE 0W-30 ACEA C2/API SN
Full Synthetic Engine Oil which meets the requirements of FCA Material
Standard 9.55535-GS, such as SELENIA DIGITEK.
| CAUTION: |
Failure to use the recommended SN PLUS or equivalent oil can cause
engine damage not covered by the vehicle warranty.
|
|
5 Quarts
|
4.7 Liters
|
N/A
|
05166241CA
|
|
♦♦ Engine Oil - NAFTA (2.4L Engine)
|
We recommend you use SAE 0W-20 API Certified Engine Oil, meeting
the requirements of FCA Material Standard MS-6395 such as Mopar, Pennzoil,
and Shell Helix. Refer to your engine oil filler cap for correct SAE
grade.
|
5.5 Quarts
|
5.2 Liters
|
68218950AB
|
68218950GA
|
|
♦♦ Engine Oil - EXPORT
(2.4L Engine)
|
We recommend you use
API Certified SAE 0W-20 Engine Oil, such as Mopar, Pennzoil, Shell
Helix or equivalent meeting the requirements of FCA Material Standard
MS-6395 or ACEA A1/B1. Refer to your engine oil filler cap for correct
SAE grade.
|
5.5 Quarts
|
5.2 Liters
|
68218950AB
|
68218950GA
|
|
♦♦♦ Engine Oil - NAFTA (3.2L Engine)
|
We recommend you use API Certified SAE 5W-20 Engine Oil, meeting
the requirements of FCA Material Standard MS-6395 such as Mopar, Pennzoil,
and Shell Helix. Refer to your engine oil filler cap for correct SAE
grade.
|
6.0 Quarts
|
5.6 Liters
|
68218890AB
|
68218890GB
|
|
♦♦♦ Engine Oil - EXPORT (3.2L Engine)
|
We recommend you use API Certified SAE 5W-20 Engine Oil, such as
Mopar, Pennzoil, Shell Helix or equivalent meeting the requirements
of FCA Material Standard MS-6395 or ACEA A1/B1. Refer to your engine
oil filler cap for correct SAE grade. SAE 5W-30 engine oil approved
to FCA Material Standard MS-6395 or ACEA A1/B1 such as Pennzoil or
Shell Helix may be used when SAE 5W-20 engine oil is not available.
|
6.0 Quarts
|
5.6 Liters
|
68218890AB
|
68218890GB
|
|
Engine Oil - (2.2L Diesel Engine)
|
For best performance and maximum protection under all types of operating
conditions, the manufacturer recommends Fully Synthetic Low Ash 0W-
30 engine oils that meet the requirements of FCA Material Standard
Standard 9.55535-DS1, MS.90047 and ACEA C2. If lubricants compliant
with the required specifications are not available, products that
comply with the minimum required characteristics can be used for topping
off; in this case optimal performance of the engine is not guaranteed.
The use of products with specifications other than those indicated
above could cause damage to the engine not covered by the warranty.
|
4.5 Quarts
|
4.3 Liters
|
N/A
|
68291576GA
|
|
Fuel (approximate)
|
|
Fuel Selection (2.0L Engines)
|
87 Octane (R+M)/2, 0-15% Ethanol.
|
15.8 Gallons
|
60.0 Liters
|
—
|
—
|
|
Fuel Selection (2.4L and 3.2L Engines)
|
87 Octane, 0-15% Ethanol.
Export -
2.4L 91 Research Octane Number (RON) (EN228 Specifications)
Export - 3.2L 91-93 Research Octane Number (RON) (EN228 Specifications)
|
15.8 Gallons
|
60.0 Liters
|
—
|
—
|
|
Fuel Selection (2.2L Diesel Engines)
|
Specification EN590
|
15.8 Gallons
|
60.0 Liters
|
—
|
—
|
|
Additive for Diesel Emissions (UREA) - If
Equipped
|
Adblue (Urea-Water Solution) According to
DIN 70 070 and ISO 22241-1
|
4.3 Gallons
|
16.3 Liters
|
—
|
—
|
|
♦ System fill capacity
includes heater and coolant recovery bottle filled to MAX level.
|
|
♦♦ SAE 5W-20
engine oil approved to MS-6395 or 9.55535-CR1 may be used when SAE
0W-20 engine oil is not available. Please ensure that you switch back
to 0W-20 for the next oil change, as indicated by your vehicles automatic
oil change indicator.
|
|
♦♦♦ SAE 5W-30 engine
oil approved to MS-6395 or 9.55535-CR1 may be used when SAE 5W-20
engine oil is not available.
|
|
| CAUTION: |
Nominal refill capacities are
shown. A variation may be observed from vehicle to vehicle due to
manufacturing tolerance and refill procedure.
|
|