FLUIDS, LUBRICANTS AND GENUINE PARTS


ENGINE

Description Type Part Number Capacities
U.S. Metric
Cooling System
♦ Engine Coolant (3.0L Diesel Engines) MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 12.7 Quarts 12 Liters
♦ Engine Coolant (3.6L Engine) MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 10.0 Quarts 9.5 Liters
♦ Engine Coolant (5.7L Engine) without Severe Duty II Cooling System MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 14.5 Quarts 13.9 Liters
♦ Engine Coolant (5.7L Engine) with Severe Duty II Cooling System MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 15.0 Quarts 14.3 Liters
♦ Engine Coolant (6.4L Engine) MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 15.2 Quarts 14.4 Liters
Engine Oil with Filter
Engine Oil - ACEA Categories (Gasoline Engines) For countries that use the ACEA European Oil Categories for Service Fill Oils, We recommend you use engine oils meeting the requirements of ACEA C3, and approved to Fiat 9.5535. SAE 5W-30 engine oil approved to Fiat 9.55535 may be used when SAE 5W-20 engine oil is not available. – – –
Engine Oil (3.0L Diesel Engine) MOBIL 1® SAE 5W-30 Low Ash Fully Synthetic oil, meeting the requirements of ACEA C3 1 Quart - 68001334PD 9.1 Quarts 8.6 Liters
Engine Oil (3.6L Engines) MOPAR® API Certified SAE 5W-20 engine oil, meeting the requirements of Chrysler Group LLC Material Standard MS-6395. 1 Quart - 04761872PA 6 Quarts 5.6 Liters
5 Quarts- 04761851PA
Engine Oil (5.7L Engines) MOPAR® API Certified SAE 5W-20 engine oil, meeting the requirements of Chrysler Group LLC Material Standard MS-6395. 1 Quart - 04761872PA 7 Quarts 6.6 Liters
5 Quarts-04761851PA
Engine Oil (6.4L Engine) MOPAR® API Certified SAE Full Synthetic engine oil 0W-40, meeting the requirements of Chrysler Group LLC Material Standard MS-10725. 1 Quart - 68171066PA 7 Quarts 6.6 Liters
Engine Oil Filter (3.0L Diesel Engine) MOPAR® Engine Oil Filter Kit 68109834AA N/A N/A
Engine Oil Filter (3.6L Engines) MOPAR® Engine Oil Filter 68079 744AB N/A N/A
Engine Oil Filter (5.7L and 6.4L Engines) MOPAR® Engine Oil Filter 4884 899AB N/A N/A
Fuel (approximate)
Fuel Selection (3.0L Diesel Engine) Use good quality diesel fuel from a reputable supplier in your vehicle. The manufacturer requires that you must fuel this vehicle with Ultra Low Sulfur Highway Diesel fuel (15 ppm Sulfur maximum) and prohibits the use of Low Sulfur Highway Diesel fuel (500 ppm Sulfur maximum) to avoid damage to the emissions control system. For most year-round service, No. 2 diesel fuel meeting ASTM specification D-975 Grade S15 will provide good performance. If the vehicle is exposed to extreme cold (below 20F or -7C), or is required to operate at colder-than-normal conditions for prolonged periods, use climatized No. 2 diesel fuel or dilute the No. 2 diesel fuel with 50% No. 1 diesel fuel. This will provide better protection from fuel gelling or wax-plugging of the fuel filters. This vehicle is fully compatible with biodiesel blends up to 5% biodiesel meeting ASTM specification D-975. N/A 19 Gallons 72 Liters
Fuel Selection (3.6L Engine) 87 Octane N/A 19 Gallons 72 Liters
Fuel Selection (5.7L Engine) 87 Octane Acceptable - 89 Octane Recommended N/A 19 Gallons 72 Liters
Fuel Selection (6.4L Engine) 91 Octane Only or higher N/A 19 Gallons 72 Liters
A/C Refrigerant System
A/C Refrigerant System R-134a 82300101AB 1.50 Pounds 681 Grams
 
♦ System fill capacity includes heater and coolant recovery bottle filled to MAX level.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


SPARK PLUGS

Description Type Part Number Gap
U.S. Metric
Spark Plugs (3.6L Engine) Champion® SP149125AD (RER8ZWYCB4) 0.043 in 1.10 mm
Spark Plugs (5.7L Engine) NGK® Yttrium 05149177AB (LZFR5C-11) 0.043 in 1.10 mm
Spark Plugs (6.4L Engine) NGK® Single Platinum 05149212AC (LZTR6AP11EG) 0.043 in 1.10 mm

TRANSMISSION

Description Type Part Number Capacities
U.S. Metric
Automatic
NAG 1 - Service Fill MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 5.3 Quarts 5.0 Liters
1 Gallon - 05013458AA
♦ NAG 1 - Overhaul Fill MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 8.1 Quarts 7.7 Liters
1 Gallon - 05013458AA
♦ 8HP45 MOPAR® ATF 1 Quart - 68157995AA 9.5 Quarts 9.0 Liters
♦ Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures. For the 8HP45 see to the fluid checking standard procedure (Refer to 21 - Transmission and Transfer Case/Automatic - 8HP45/FLUID and FILTER - Standard Procedure) prior to checking or adding fluid to this transmission.

CAUTION: A unique transmission fluid has been developed for this transmission. This fluid is NOT compatible with ATF+4 or any other current Chrysler transmission fluid. For specifics about this unique fluid see FLUIDS, LUBRICANTS AND GENUINE PARTS.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


TRANSFER CASE

Description Type Part Number Capacities
U.S. Metric
BW 44-40 MOPAR® Transfer Case Lubricant 1 Quart - 68049954AA 2.11 Pints 1.0 Liters
 

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


CHASSIS

Description Type Part Number Capacities
U.S. Metric
Axles (Front)
175mm FIA Front Axle MOPAR® Synthetic Gear Lubricant SAE 75W-90 1 Quart - 05010320AA 1.26 Pints 0.6 Liters
Axles (Rear)
200mm RII Rear Axle MOPAR® Synthetic Gear Lubricant SAE 75W-140 1 Quart - 04874469 1.2 Quarts 1.1 Liters
215mm RII Rear Axle MOPAR® Synthetic Gear Lubricant SAE 75W-140 1 Quart - 04874469 1.3 Quarts 1.2 Liters
♦ 226mm RII Rear Axle MOPAR® Synthetic Gear Lubricant SAE 75W-90 1 Quart - 05010320AA 1.4 Quarts 1.3 Liters
Chassis Systems
♦♦ Brake Master Cylinder MOPAR® Brake Fluid DOT 3, SAE J1703. 12 oz. Bottle - 04318080AB N/A N/A
32 oz. Bottle - 04318081AB
♦♦♦ Power Steering Reservoir (Belt Driven Pump) MOPAR® Power Steering Fluid +4 1 Quart - 05013457AA N/A N/A
♦♦♦♦ Electro Hydraulic Power Steering (EHPS) Hydraulic Power Steering Fluid 1 Quart - 68088485AA or 05127381AB N/A N/A
 
♦ Limited-Slip Rear Axles require the addition of 118 ml (4 oz.) MOPAR® Limited Slip Additive.
♦♦ If MOPAR® Brake Fluid DOT 3 is not available, then MOPAR® Brake and Clutch Fluid DOT 4 (P/N 04549625AC), is acceptable.
♦♦♦ If MOPAR® Power Steering Fluid +4 is not available, then MOPAR® ATF +4 Automatic Transmission Fluid (P/N 05166226AA), is acceptable.
♦♦♦♦

CAUTION: There is an Electro Hydraulic Power Steering (EHPS) pump on Non-SRT vehicles which requires a different power steering fluid. Do not mix power steering fluid types. Damage may result to the power steering pump and system if any other fluid is used. The EHPS system uses fluid which meets material specification MS-11655 or equivalent. The mechanical power steering pump systems on SRT vehicles require the use of Power Steering Fluid +4, which meets material specification MS-9602 or equivalent. Do not overfill.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.