SPECIFICATIONS


ENGINE

Description Type Part Number Capacities
U.S. Metric
Cooling System
♦ Engine Coolant (2.0L and 2.4L Engines) MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Material Standard MS-90032. 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 7.2 Quarts 6.8 Liters
Engine Oil with Filter
♦♦ Engine Oil (2.0L and 2.4L Engines) We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Material Standard MS-6395 such as MOPAR, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. 1 Quart - 04761872AC 4.5 Quarts 4.26 Liters
5 Quarts - 04761851AD
Engine Oil Filter (2.0L and 2.4L Engines) MOPAR® Engine Oil Filter 04892339AA N/A N/A
Fuel (approximate)
Fuel Selection (2.0L and 2.4L Engines) 87 Octane, 0-15% Ethanol. N/A 13.6 Gallons 51.5 Liters
91 Octane Unleaded Fuel, Export
A/C Refrigerant System
Refrigerant R-134a 82300101AB 1.31 Pounds 595 Grams
♦ System fill capacity includes heater and coolant recovery bottle filled to MAX level.
♦♦ For countries that use the ACEA European Oil Categories for Service Fill Oils, use the recommended engine oil that meets the requirements of ACEA C3, and approved to MB 229.31 or MB 229.51 only. Refer to your engine oil filler cap for correct SAE grade.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


SPARK PLUGS

Description Type Part Number Gap
U.S. Metric
Spark Plugs (2.0L and 2.4L Engines) NGK® Nickel 04606823AB (ZFR5F-11) 0.043 in 1.10 mm

TRANSMISSION AND DRIVELINE

Description Type Part Number Capacities
U.S. Metric
Automatic
CVT - Service Fill Use only MOPAR CVTF+4 Continuously Variable Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. 1 Quart - 05191184AA 14.8 Pints 7.0 Liters
1 Gallon - 05191185AA
♦ CVT - Overhaul Fill Use only MOPAR CVTF+4 Continuously Variable Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. 1 Quart - 05191184AA 17.1 Pints 8.1 Liters
1 Gallon - 05191185AA
6F24 Use only MOPAR SP-IV M Automatic Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. 1 Quart - 68171866AA (Refer to 21 - Transmission and Transfer Case/Automatic - 6F24/FLUID/Standard Procedures)
1 Gallon - 68171869AA
Manual
NV T355 MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 2.5 - 2.8 Quarts 2.4 - 2.7 Liters
1 Gallon - 05013458AA
AISIN BG6 MOPAR® ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 2.1 Quarts 2.0 Liters
1 Gallon - 05013458AA
Driveline
POWER TRANSFER UNIT We recommend you use MOPAR Gear & Axle Lubricant SAE 80W-90 MS-9020 API GL 5. 1 Quart - 04874468 18.2 Ounces 0.53 Liters
REAR DRIVE ASSEMBLY We recommend you use MOPAR Gear & Axle Lubricant SAE 80W-90 MS-9020 API GL 5. 1 Quart - 04874468 16.2 Ounces 0.47 Liters
 
♦ Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


CHASSIS

Description Type Part Number Capacities
U.S. Metric
Chassis Systems
♦♦ Brake Master Cylinder MOPAR® Brake Fluid DOT 3, SAE J1703. 12 oz. Bottle - 04318080AB N/A N/A
32 oz. Bottle - 04318081AB
♦♦♦ Power Steering Reservoir MOPAR® Power Steering Fluid +4 1 Quart - 05013457AA N/A N/A
 
♦♦ If MOPAR® Brake Fluid DOT 3 is not available, then MOPAR® Brake and Clutch Fluid DOT 4 (P/N 04549625AC), is acceptable.
♦♦♦ If MOPAR® Power Steering Fluid +4 is not available, then MOPAR® ATF +4 Automatic Transmission Fluid (P/N 05166226AA), is acceptable.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.