SPECIFICATIONS


ENGINE

Description Type Capacities Part Number Global Part Number
U.S. Metric
Cooling System
♦ Engine Coolant (2.0L and 2.4L Engines) MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Material Standard MS-90032. 7.2 Quarts 6.8 Liters 68163848AB 68163848GB
Engine Oil with Filter
♦♦ Engine Oil (2.0L and 2.4L Engines) We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Material Standard MS-6395 such as MOPAR, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. 4.5 Quarts 4.26 Liters 68218890AB 68218890GB
Engine Oil Filter (2.0L and 2.4L Engines) MOPAR® Engine Oil Filter N/A N/A — —
Fuel (approximate)
Fuel Selection (2.0L and 2.4L Engines) 87 Octane, 0-15% Ethanol. 13.6 Gallons 51 Liters — —
Minimum 91 Research Octane Number (RON), 0-15% Ethanol, Export — —
A/C Refrigerant System
Refrigerant R-134a 1.31 Pounds 595 Grams 82300101AC 82300101GB
♦ System fill capacity includes heater and coolant recovery bottle filled to MAX level.
♦♦ BRAZIL/EUROPE/JAPAN/LATIN AMERICA/UK/S.AFRICA We recommend you use SAE 5W-20 engine oil, meeting the requirements of Material Standard MS-6395, ACEA A1/B1 or Material Standard 9.55535–CR1. Refer to your engine oil filler cap for correct SAE grade. SAE 5W-30 engine oil approved to MS-6395 or Material Standard MS-6395, ACEA A1/B1 or Material Standard 9.55535–CR1. may be used when SAE 5W-20 engine oil is not available.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


SPARK PLUGS

Description Type Gap
U.S. Metric
Spark Plugs (2.0L and 2.4L Engines) NGK® Nickel 0.043 in 1.10 mm

TRANSMISSION AND DRIVELINE

Description Type Capacities Part Number Global Part Number
U.S. Metric
Automatic
CVT - Service Fill Use only MOPAR CVTF+4 Continuously Variable Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. 14.8 Pints 7.0 Liters 05191184AA 05191184GA
♦ CVT - Overhaul Fill Use only MOPAR CVTF+4 Continuously Variable Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. 17.1 Pints 8.1 Liters 05191184AA 05191184GA
6F24 Use only MOPAR SP-IV M Automatic Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. (Refer to 21 - Transmission and Transfer Case/Automatic - 6F24/FLUID/Standard Procedures) 68171866AB 68171866GB
       
Manual
♦♦ NV T355 MOPAR® ATF+4 Automatic Transmission Fluid 2.5 - 2.8 Quarts 2.4 - 2.7 Liters 68218057AB 68218057GB
♦♦ AISIN BG6 MOPAR® ATF+4 Automatic Transmission Fluid 2.1 Quarts 2.0 Liters 68218057AB 68218057GB
Driveline
POWER TRANSFER UNIT We recommend you use MOPAR Gear & Axle Lubricant SAE 80W-90 API GL 5. 18.2 Ounces 0.53 Liters 68218041AA 68218041GA
REAR DRIVE ASSEMBLY We recommend you use MOPAR Gear & Axle Lubricant SAE 80W-90 API GL 5. 16.2 Ounces 0.47 Liters 68218041AA 68218041GA
♦ Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures.
♦♦ Export, We recommend you use MOPAR Manual Transmission Lubricant meeting the requirements of Material Standard MS-9602 or Material Standard 9.55550-AV4.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


CHASSIS

Description Type Capacities Part Number Global Part Number
U.S. Metric
Chassis Systems
♦ Brake Master Cylinder We recommend you use MOPAR DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. N/A N/A 04318080AD 04318080GC
Power Steering Reservoir We recommend you use MOPAR Power Steering Fluid +4, or MOPAR ATF+4 Automatic Transmission Fluid. N/A N/A 68218064AB 68218064GB
♦ Export, We recommend you use MOPAR Brake & Clutch Fluid DOT 4, that meets the requirements of Material Standard MS.90039.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.