SPECIFICATIONS


ENGINE

Description Type Part Number Capacities
U.S. Metric
Cooling System
♦ Engine Coolant (1.4L Turbo Engine) MOPARŪ Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 7.2 Quarts 6.8 Liters
♦ Engine Coolant (2.0L and 2.4L Engines) MOPARŪ Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 7.2 Quarts 6.8 Liters
Engine Oil with Filter
Engine Oil (1.4L Turbo Engine) MOPARŪ API Certified SAE 5W-40 synthetic engine oil, meeting the requirements of Chrysler Material Standard MS-10725. 1 Quart - 05127394PB 4.0 Quarts 3.8 Liters
♦♦ Engine Oil (2.0L Engine) MOPARŪ API Certified SAE 0W-20 engine oil, meeting the requirements of Chrysler Material Standard MS-6395. 1 Quart - 68152004PA 5.0 Quarts 4.7 Liters
♦♦ Engine Oil (2.4L Engine) MOPARŪ API Certified SAE 0W-20 engine oil, meeting the requirements of Chrysler Material Standard MS-6395. 1 Quart - 68152004PA 5.5 Quarts 5.2 Liters
Engine Oil Filter (1.4L Turbo Engine) MOPARŪ Engine Oil Filter 68102241AA N/A N/A
Engine Oil Filter (2.0L and 2.4L Engines) MOPARŪ Engine Oil Filter 68197769AA N/A N/A
Fuel (approximate)
Fuel Selection (1.4L Turbo Engine) 91 Octane Unleaded Recommended, 87 Octane or higher Unleaded Acceptable N/A 13.2 Gallons 50 Liters
Fuel Selection (2.0L and 2.4L Engines) 87 Octane Unleaded N/A 14.2 Gallons 54 Liters
Fuel Selection (2.4L GT models only) 87 Octane Unleaded N/A 15.8 Gallons 60 Liters
A/C Refrigerant System
R-134a Refrigerant 1.25 lbs. 567g
R-1234a Refrigerant 1.19 lbs. 539g
♦ System fill capacity includes heater and coolant recovery bottle filled to MAX level.
♦♦ If 0W-20 engine oil is not available, SAE 5W-20 API Certified engine oil may be used as a temporary suitable alternative.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


SPARK PLUGS

Description Part Number Gap
U.S. Metric
Spark Plugs (1.4L Turbo Engine) 68070507AB (SIKR9A7) 0.026 in 0.65 mm
Spark Plugs (2.0L Engine) SP079888AB (REC10WMPB) 0.043 in 1.10 mm
Spark Plugs (2.4L Engine) (REC10WMPB4) 0.047 in 1.20 mm

6F24 AUTOMATIC TRANASAXLE

Description Type Part Number Capacity
♦ 6F24 Automatic Transaxle MOPARŪ Automatic Transmission Fluid 1 Quart - 68171866AB Factory Fill = 7.1L (7.5 qt.). Service Fill = Measured Level in mm
♦ For the 6F24 Automatic Transaxle fluid level inspection (Refer to 21 - Transmission and Transfer Case/Automatic - 6F24/FLUID/Standard Procedures) .

C635 DDCT AUTOMATIC TRANASAXLE

Description Type Part Number Capacity
Hydraulic Fluid (for Reservoir) MOPARŪ C635 DDCT 1 Quart - 68092638AA 0.9 L (0.95 qts)
♦C635 DDCT Automatic Transaxle MOPARŪ C635 DDCT/MTX Transmission Fluid 1 Quart - 68092630AA 1.66 L (1.75 qt)

MANUAL TRANSAXLE

Description Type Part Number Capacity
♦ C635 Manual Transaxle MOPARŪ C635 DDCT/MTX Transmission Fluid 1 Quart - 68092630AA 1.7 Liter (1.8 Quarts)
♦ For the C635 fluid level inspection, (Refer to 21 - Transmission and Transfer Case/Manual/FLUID - Standard Procedure) .

CHASSIS

Description Type Part Number Capacities
U.S. Metric
Chassis Systems  
♦ Brake Master Cylinder MOPARŪ Brake Fluid DOT 3, SAE J1703. 12 oz. Bottle - 04318080AB N/A N/A
32 oz. Bottle - 04318081AB
♦ Brake/Clutch Master Cylinder
♦ If MOPARŪ Brake Fluid DOT 3 is not available, then MOPARŪ Brake and Clutch Fluid DOT 4 is acceptable.