Cooling System
|
♦ Engine Coolant (1.8L,
2.0L and 2.4L Engines)
|
MOPARŪ Antifreeze/Coolant
5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology)
|
1 Gallon - 05066386AA
|
7.2 Quarts
|
6.8 Liters
|
♦ Diesel Engine Coolant
(2.2L Turbo Engine - OM651)
|
MOPARŪ Antifreeze/Coolant
5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology)
|
1 Gallon - 05066386AA
|
10 Quarts
|
9.5 Liters
|
Engine Oil with
Filter
|
♦♦ Engine Oil (1.8L,
2.0L and 2.4L Engines)
|
MOPARŪ API Certified
SAE 5W-20 engine oil, meeting the requirements of Chrysler Material
Standard MS-6395.
|
1 Quart - 04761872AC
|
4.5 Quarts
|
4.26 Liters
|
5 Quarts - 04761851AD
|
♦♦ Engine Oil (2.2L
Turbo Diesel Engine - OM651)
|
For best performance
and maximum protection under all types of operating conditions, the
manufacturer only recommends full synthetic engine oils approved to
MB 228.51, MB 229.31 or MB 229.51 and meeting the requirements of
Chrysler Material Standard MS-10725. The manufacturer recommends the
use of a full synthetic engine oil, such as low SPAsh Multigrade 0W-30,
0W-40, 5W-30, 5W-40, 10W-30, 10W-40.
|
N/A
|
8.0 Quarts
|
7.5 Liters
|
Engine Oil Filter (1.8L,
2.0L and 2.4L Engines)
|
MOPARŪ Engine Oil Filter
|
04892339AA
|
N/A
|
N/A
|
Engine Oil Filter (2.2L
Turbo Diesel Engine - OM651)
|
MOPARŪ Engine Oil Filter
|
68091826AA
|
N/A
|
N/A
|
Fuel (approximate)
|
Fuel Selection (1.8L,
2.0L and 2.4L Engines)
|
87 Octane
Unleaded Fuel, Domestic
|
N/A
|
13.5 Gallons
|
51.0 Liters
|
91 Octane
Unleaded Fuel, Export
|
Fuel Selection ( 2.2L
Turbo Diesel Engine - OM651)
|
Use only the best quality
fuel with a calculated Cetane Index of 50 or higher. In addition,
the manufacturer recommends using diesel fuel with a sulfur content
of less than or equal to 15 ppm.
|
N/A
|
13.5 Gallons
|
51.0 Liters
|
A/C Refrigerant
System
|
Refrigerant
|
R-134a
|
82300101AB
|
1.31 Pounds
|
595 Grams
|
♦ System fill capacity
includes heater and coolant recovery bottle filled to MAX level.
|
♦♦ For countries that
use the ACEA European Oil Categories for Service Fill Oils, use the
recommended engine oil that meets the requirements of ACEA C3, and
approved to MB 229.31 or MB 229.51 only. Refer to your engine oil
filler cap for correct SAE grade.
|
CAUTION: |
Nominal refill capacities are
shown. A variation may be observed from vehicle to vehicle due to
manufacturing tolerance and refill procedure.
|
|