|
Cooling System
|
|
♦ Engine Coolant (3.6L
Engine)
|
We recommend you use
MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic
Additive Technology) meeting the requirements of Material Standard
MS.90032.
|
1 Gallon - 68163848AA (concentrate) 68163849AA (50/50)
|
13.4 Quarts
|
12.6 Liters
|
|
♦ Engine Coolant (2.8L
Engine)
|
We recommend you use
MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic
Additive Technology) meeting the requirements of Material Standard
MS.90032.
|
1 Gallon - 68163848AA (concentrate) 68163849AA (50/50)
|
17.3 Quarts
|
16.6 Liters
|
|
Engine Oil with Filter
|
|
♦♦♦ Engine Oil (3.6L
Engine)
|
We recommend you use
API Certified SAE 5W-20 Engine Oil, meeting the requirements of Material
Standard MS-6395 such as MOPAR, Pennzoil, and Shell Helix. Refer to
your engine oil filler cap for correct SAE grade.
|
1 Quart - 04761872PA
|
6 Quarts
|
5.6 Liters
|
|
5 Quarts- 04761851PA
|
|
Engine Oil (3.6L Engine – Export)
|
SAE Grade 5W-30 fully synthetic
engine oil that meets Classification 9.55535- CR1, API SN, ILSAC GF-5
(SELENIA K POWER, Contractual Technical Reference N� F042.F11)
|
–
|
6 Quarts
|
5.6 Liters
|
|
♦♦♦♦ Engine Oil (2.8L
Diesel Engine)
|
SAE 0W-40 Diesel Engine
Oils confirming to API (American Petroleum Institute) Quality CI-4
or CJ-4. For countries that use the ACEA European Oil Categories for
Service Fill Oils, use engine oils meeting the requirements of ACEA
C3 and approved to MB 229.31 or MB 229.51. Classification 9.55535-S3,
API SM/CF, ACEA C3 (SELENIA MULTIPOWER C3, Contractual Technical Reference
N� F129.F11)
|
1 Quart - 05127394AA
|
7 Quarts
|
6.6 Liters
|
|
Engine Oil Filter (3.6L
Engine)
|
MOPAR� Engine Oil Filter
Kit
|
68191349AA
|
N/A
|
N/A
|
|
Engine Oil Filter (2.8L
Diesel engine)
|
MOPAR� Engine Oil Filter
|
68031597AB
|
N/A
|
N/A
|
|
Fuel (approximate)
|
|
Fuel Selection (3.6L
Engine)
|
87 Octane, 0-15% Ethanol.
|
N/A
|
20 Gallons
|
76 Liters
|
|
Fuel Selection (2.8L
Diesel Engines)
|
Use only the best quality
fuel with a calculated Cetane Index of 50 or higher. In addition,
the manufacturer recommends using diesel fuel with a sulfur content
of
less than or
equal to 15 ppm.
|
N/A
|
20 Gallons
|
76 Liters
|
|
A/C Refrigerant System
|
|
Front A/C Only
|
R-134a
|
82300101AB
|
1.81 Pounds
|
0.82 Kilograms
|
|
Front and Rear A/C
|
R-134a
|
82300101AB
|
2.53 Pounds
|
1.15 Kilograms
|
|
♦ System fill capacity
includes heater and coolant recovery bottle filled to MAX level. Add
2.9 Qts (2.8 L) if equipped with a rear heater
|
|
♦♦ For particularly harsh climate
conditions, a mixture of 60% PARAFLUUP and 40% demineralised water
is recommended.
|
|
♦♦♦ For countries that
use the ACEA European Oil Categories for Service Fill Oils, use the
recommended engine oil that meets the requirements of ACEA C3, and
approved to MB 229.31 or MB 229.51 only. Refer to your engine oil
filler cap for correct SAE grade.
|
|
♦♦♦♦ If equipped with
a particulate filter, use SAE 5W-30 Diesel Engine Oils confirming
to API (American Petroleum Institute) Quality CI-4 or CJ-4. For countries
that use the ACEA European Oil Categories for Service Fill Oils, use
engine oils meeting the requirements of ACEA C3 (LOW ASH) and approved
to MB 229.31 or MB 229.51. Lubricants with ACEA C3 performance as
a minimum may be used for Diesel engines in an emergency, where no
original products are available. In such event, the engine may not
provide optimal performance. We recommend having the lubricant replaced
with one of the recommended lubricants as soon as possible. Using
products with specifications lower than ILSAC GF-5 for gasoline engines
or lower than ACEA C3 for Diesel engines may cause engine damage not
covered by warranty.
|
|
| CAUTION: |
Nominal refill capacities are
shown. A variation may be observed from vehicle to vehicle due to
manufacturing tolerance and refill procedure.
|
|