SPECIFICATIONS


ENGINE

Description Type Part Number Capacities
U.S. Metric
Cooling System
♦ Engine Coolant (3.0L Diesel Engines) MOPARŪ Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 12.0 Quarts 11.4 Liters
♦ Engine Coolant (3.0L/3.6L Gas Engines) MOPARŪ Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 10.4 Quarts 9.9 Liters
♦ Engine Coolant (5.7L Engines without Trailer Tow Package) MOPARŪ Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 15.4 Quarts 14.6 Liters
♦ Engine Coolant (5.7L Engines with Trailer Tow Package) MOPARŪ Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 16.0 Quarts 15.2 Liters
♦ Engine Coolant (6.4L Engines with Trailer Tow Package) MOPARŪ Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of Chrysler Material Standard MS-12106 1 Gallon - 68163848AA (concentrate) 68163849AA (50/50) 16.0 Quarts 15.5 Liters
Engine Oil with Filter
Engine Oil (3.0L Diesel Engine) We recommend you use 5W-40 synthetic engine oil such as MOPAR or Shell Rotella that meets FCA Material Standard MS-10902 and the API CJ-4 engine oil category is required. 1 Quart - 68001332PB 8 Quarts 7.7 Liters
♦♦ Engine Oil (3.0L/3.6L Gas Engine- Domestic/Non-ACEA) API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395 such as MOPAR, PennzoilŪ, and Shell HelixŪ. 1 Quart - 04761872PA 6 Quarts 5.6 Liters
5 Quarts - 04761851PA
♦♦ Engine Oil (3.0L/3.6L Gas Engine- ACEA Categories) For countries that use the ACEA European Oil Categories for Service Fill Oils, we recommend you use engine oils meeting the requirements of ACEA C3, and approved to Fiat 9.5535. – 6 Quarts 5.6 Liters
♦♦♦ Engine Oil (5.7L Engine - Domestic/Non-ACEA) API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395 such as MOPAR, PennzoilŪ, and Shell HelixŪ. 1 Quart - 04761872PA 7 Quarts 6.6 Liters
5 Quarts - 04761851PA
♦♦♦ Engine Oil (5.7L Engine - ACEA Categories) For countries that use the ACEA European Oil Categories for Service Fill Oils, we recommend you use engine oils meeting the requirements of ACEA C3, and approved to Fiat 9.5535. – 7 Quarts 6.6 Liters
Engine Oil (6.4L Engine) Domestic and Export For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SN. The manufacturer recommends the use of Pennzoil Ultra™ 0W-40 or equivalent MOPARŪ engine oil meeting the requirements of Chrysler Material Standard MS-12633 for use in all operating temperatures. 1 Quart - 68171066PA 7 Quarts 6.6 Liters
Engine Oil Filter (3.0L Diesel Engine) MOPARŪ Engine Oil Filter Kit 68109834AA N/A N/A
Engine Oil Filter (3.0L/3.6L Gas Engine) MOPARŪ Engine Oil Filter Kit 68191349AA N/A N/A
Engine Oil Filter (5.7L/6.4L Engine) MOPARŪ Engine Oil Filter 04884899AB N/A N/A
Diesel Fuel Filter We recommend you use MOPARŪ Fuel Filter. Must meet 3 micron rating. Using a fuel filter that does not meet the manufacturers filtration and water separating requirements can severely impact fuel system life and reliability. 4726067AA N/A N/A
Fuel (approximate)
Fuel Selection (3.0L Diesel Engine) Use good quality diesel fuel from a reputable supplier in your vehicle. Federal law requires that you must fuel this vehicle with Ultra Low Sulfur Highway Diesel fuel (15 ppm Sulfur maximum) and prohibits the use of Low Sulfur Highway Diesel fuel (500 ppm Sulfur maximum) to avoid damage to the emissions control system. For most year-round service, No. 2 diesel fuel meeting ASTM specification D-975 Grade S15 will provide good performance. We recommend you use a blend of up to 5% biodiesel, meeting ASTM specification D-6751 with your diesel engine.This vehicle is compatible with biodiesel blends greater than 5% but no greater than 20% biodiesel meeting ASTM specification D-6751 provided the shortened maintenance intervals are followed as directed. N/A 24.6 Gallons 93.1 Liters
Fuel Selection (3.0L/3.6L Gas Engine) 87 Octane N/A 25 Gallons 94 Liters
Fuel Selection (3.0L/ 3.6L Gas Engine) Flexible Fuel Ethanol E85 (ASTM D5798) N/A 25 Gallons 94 Liters
Fuel Selection (5.7L Engine) 87 Octane Acceptable - 89 Octane Recommended N/A 25 Gallons 94 Liters
Fuel Selection (6.4L Engine) 91 Octane Only or higher N/A 25 Gallons 94 Liters
Diesel Exhaust Fluid MOPARŪ Diesel Exhaust Fluid (API Certified) (DEF) or equivalent that has been API Certified to the ISO 22241 standard. Use of fluids not API Certified to ISO 22241 may result in system damage. 1 Gallon - 68035704AB 8 Gallons 30.3 Liters
2.5 Gallon - 68056278AB
55 Gallon Drum - 68035700AB
A/C Refrigerant System
A/C Refrigerant R-134a 82300101AB 1.38 Pounds 623.7 Grams
♦ System fill capacity includes heater and coolant recovery bottle filled to MAX level.
♦♦ SAE 5W-30 engine oil approved to Fiat 9.55535 may be used when SAE 5W-20 engine oil is not available MOPARŪ SAE 5W-30 engine oil approved to Chrysler MS-6395 such as PennzoilŪ or Shell HelixŪ may be used when SAE 5W-20 engine oil meeting MS-6395 is not available.
♦♦♦ Vehicles equipped with a 5.7L engine must use SAE 5W-20 oil. Failure to do so may result in improper operation of the Fuel Saver Technology.


NOTE: If the vehicle is exposed to extreme cold (below 20°F or -7°C), or is required to operate at colder-thannormal conditions for prolonged periods, use climatized No. 2 diesel fuel or dilute the No. 2 diesel fuel with 50% No. 1 diesel fuel. This will provide better protection from fuel gelling or wax-plugging of the fuel filters.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


SPARK PLUGS

Description Type Part Number Gap
U.S. Metric
Spark Plugs (3.0L/3.6L EHD; ERB Engine) We recommend you use MOPARŪ Spark Plugs. SP149125AD 0.043 in 1.10 mm
Spark Plugs (5.7L EZH Engine) We recommend you use MOPARŪ Spark Plugs. SP143877AA 0.043 in 1.10 mm
Spark Plugs (6.4L ESG Engine) We recommend you use MOPARŪ Spark Plugs. SP149212AC 0.043 in 1.10 mm

TRANSMISSION

Description Type Part Number Capacities
U.S. Metric
Automatic
HP45 – 8 Speed Mopar ZF 8&9 Speed ATF, Shell L12108 68157995AA 8.98 Quarts 8.5 Liters
HP70 – 8 Speed Mopar ZF 8&9 Speed ATF, Shell L12108 68157995AA 8.77 Quarts 8.3 Liters
♦ Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


TRANSFER CASE

Description Type Part Number Capacities
U.S. Metric
MP2010 Use ATF approved to MB 236.10, MB 236.12, such as Shell ATF 3403/M-115, Fuchs/Shell ATF 3353, or equivalent. 1 Quart - 05127382AA 1.1 Pints 0.51 Liters
MP3010 MOPARŪ ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 1.4 Quarts 1.35 Liters
1 Gallon - 05013458AA
MP3023 MOPARŪ ATF+4 Automatic Transmission Fluid 1 Quart - 05013457AA 2.0 Quarts 1.9 Liters
1 Gallon - 05013458AA

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


CHASSIS

Description Type Part Number Capacities
U.S. Metric
Axles (Front)
195FIA FE - Front Axle MoparŪ Gear and Axle Lubricant 75W-85 1 Quart - 05136035AA 0.9 Quarts 0.8 Liters
Axles (Rear)
195RIA - Rear Axle (Aluminum) MoparŪ Gear and Axle Lubricant 75W-85 1 Quart - 05136035AA 1.0 Quarts 0.9 Liters
230RIA With ELSD -Rear Axle (Aluminum) MoparŪ Gear and Axle Lubricant with Modifier 75W-85 1 Quart - 68083381AA 1.4 Quarts 1.3 Liters
230RIA Without ELSD - Rear Axle (Aluminum) MoparŪ Gear and Axle Lubricant 75W-85 1 Quart - 05136035AA 1.2 Quarts 1.1 Liters
Chassis Systems
♦ Brake Master Cylinder MOPARŪ Brake Fluid DOT 3, SAE J1703. 12 oz. Bottle - 04318080AB N/A N/A
32 oz. Bottle - 04318081AB
♦♦ Power Steering Reservoir (Belt Driven Pump) MOPARŪ Power Steering Fluid +4 1 Pint - 05166226AA N/A N/A
♦♦♦ Power Steering Reservoir (Electric Pump) MOPARŪ Hydraulic Fluid meeting the requirements of Chrysler Material Standard MS-11655 68088485AA or 05127381AB N/A N/A
♦ If MOPARŪ Brake Fluid DOT 3 is not available, then MOPARŪ Brake and Clutch Fluid DOT 4 (04549625AC), is acceptable.
♦♦ If MOPARŪ Power Steering Fluid +4 is not available, then MOPARŪ ATF +4 Automatic Transmission Fluid (05013457AA), is acceptable.

CAUTION: There is an Electro-Hydraulic Power Steering (EHPS) pump on some vehicles requiring a different fluid. Do not mix power steering fluid types. Damage may result to the power steering pump and system if any other fluid is used. The mechanical power steering pump systems on this vehicle require the use of Power Steering Fluid +4, which meets material specification MS-9602 or equivalent. The EHPS system uses fluid which meets material specification MS-11655 or equivalent. Do not overfill.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.