Cooling System
|
♦ Engine Coolant (3.0L
Diesel Engines)
|
We recommend you use
MOPARŪ Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic
Additive Technology).
|
12.0 Quarts
|
11.4 Liters
|
68163848AB
|
68163848GB
|
♦ Engine Coolant (3.0L/3.6L
Gas Engines)
|
We recommend you use
MOPARŪ Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic
Additive Technology).
|
10.4 Quarts
|
9.9 Liters
|
68163848AB
|
68163848GB
|
♦ Engine Coolant (5.7L
Engines without Trailer Tow Package)
|
We recommend you use
MOPARŪ Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic
Additive Technology).
|
15.4 Quarts
|
14.6 Liters
|
68163848AB
|
68163848GB
|
♦ Engine Coolant (5.7L
Engines with Trailer Tow Package)
|
We recommend you use
MOPARŪ Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic
Additive Technology).
|
16.0 Quarts
|
15.2 Liters
|
68163848AB
|
68163848GB
|
♦ Engine Coolant (6.4L
Engines)
|
We recommend you use
MOPARŪ Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic
Additive Technology) that meets the requirements of Material Standard
MS.90032.
|
16.0 Quarts
|
15.2 Liters
|
68163848AB
|
68163848GB
|
Engine Oil with Filter
|
Engine Oil (3.0L Diesel
Engine)
|
We recommend you use
5W-40 synthetic engine oil such as MOPAR or Shell Rotella that meets
FCA Material Standard MS-10902 and the API CJ-4 engine oil category
is required.
|
8 Quarts
|
7.7 Liters
|
68001332PB
|
68231021GB
|
Engine Oil (3.0L/3.6L
Gas Engine- Domestic/Non-ACEA)
|
We recommend you use
API Certified SAE 0W-20 Engine Oil, meeting the requirements of Material
Standard MS-6395 such as MOPAR, Pennzoil, and Shell Helix. Refer to
your engine oil filler cap for correct SAE grade.
|
6 Quarts
|
5.6 Liters
|
68218950AB
|
68218950GA
|
Engine Oil (3.0L/3.6L
Gas Engine- ACEA Categories)
|
We recommend you
use API Certified SAE 0W-20 engine oil, meeting the requirements of
Material Standard MS-6395 or 9.55535-CR1. Refer to your engine oil
filler cap for the correct SAE grade.
|
6 Quarts
|
5.6 Liters
|
68218950AB
|
68218950GA
|
♦♦♦ Engine Oil (5.7L
Engine - Domestic/Non-ACEA)
|
We recommend you use
API Certified SAE 5W-20 Engine Oil, meeting the requirements of Material
Standard MS-6395 such as MOPAR, Pennzoil, and Shell Helix. Refer to
your engine oil filler cap for correct SAE grade.
|
7 Quarts
|
6.6 Liters
|
68218890AB
|
68218890GB
|
♦♦ Engine Oil (5.7L
Engine - ACEA Categories)
|
We recommend you use API Certified
SAE 5W-20 engine oil, meeting the requirements of Material Standard
MS-6395 or 9.55535-CR1. Refer to your engine oil filler cap for the
correct SAE grade.
|
7 Quarts
|
6.6 Liters
|
68218890AB
|
68218890GB
|
Engine Oil (6.4L Engine)
Domestic and Export
|
For best performance
and maximum protection under all types of operating conditions, the
manufacturer only recommends full synthetic engine oils that meet
the American Petroleum Institute (API) categories of SN. The manufacturer
recommends the use of Pennzoil Ultra 0W-40 or equivalent MOPAR engine
oil meeting the requirements of Material Standard MS-12633 for use
in all operating temperatures.
|
7 Quarts
|
6.6 Liters
|
68171066PB
|
68171066GA
|
Engine Oil Filter (3.0L
Diesel Engine)
|
We recommend you use
MOPAR Engine Oil Filter or equivalent.
|
N/A
|
N/A
|
—
|
—
|
Engine Oil Filter (3.0L/3.6L
Gas Engine)
|
We recommend you use
MOPAR Engine Oil Filter or equivalent.
|
N/A
|
N/A
|
—
|
—
|
Engine Oil Filter (5.7L/6.4L
Engine)
|
We recommend you use
MOPAR Engine Oil Filter or equivalent.
|
N/A
|
N/A
|
—
|
—
|
Diesel Fuel Filter
|
We recommend you use MOPAR
Fuel Filter. Must meet 3 micron rating. Using a fuel filter that does
not meet the manufacturers filtration and water separating requirements
can severely impact fuel system life and reliability.
|
N/A
|
N/A
|
—
|
—
|
Fuel (approximate)
|
Fuel Selection (3.0L
Diesel Engine)
|
Use good quality diesel
fuel from a reputable supplier in your vehicle. Federal law requires
that you must fuel this vehicle with Ultra Low Sulfur Highway Diesel
fuel (15 ppm Sulfur maximum) and prohibits the use of Low Sulfur Highway
Diesel fuel (500 ppm Sulfur maximum) to avoid damage to the emissions
control system. For most year-round service, No. 2 diesel fuel meeting
ASTM specification D-975 Grade S15 will provide good performance.
We recommend you use a blend of up to 5% biodiesel, meeting ASTM specification
D-975 with your diesel engine.This vehicle is compatible with biodiesel
blends greater than 5% but no greater than 20% biodiesel meeting ASTM
specification D-7467 provided the shortened maintenance intervals
are followed as directed.
Fuel Filter: We recommend you use
MOPAR Fuel Filter. Must meet 3 micron rating. Using a fuel filter
that does not meet the manufacturers filtration and water separating
requirements can severely impact fuel system life and reliability.
NOTE: |
If the vehicle
is exposed to extreme cold (below 20°F or -7°C), or is required to
operate at colder-than-normal conditions for prolonged periods, use
climatized No. 2 diesel fuel or dilute the No. 2 diesel fuel with
50% No. 1 diesel fuel. This will provide better protection from fuel
gelling or wax-plugging of the fuel filters.
|
|
24.6 Gallons
|
93.0 Liters
|
—
|
—
|
Fuel Selection (3.0L
Diesel Engine - Europe)
|
50 Cetane or higher (Less than
10 ppm Sulfur)
|
24.6 Gallons
|
93.0 Liters
|
—
|
—
|
Fuel Selection (3.0L/3.6L
Gas Engine)
|
87 Octane, 0-15% Ethanol.
|
24.6 Gallons
|
93.0 Liters
|
—
|
—
|
Fuel Selection (3.6L
Gas Engine - Europe)
|
Minimum 91 Octane
|
24.6 Gallons
|
93.0 Liters
|
—
|
—
|
Fuel Selection (3.0L/
3.6L Gas Engine) Flexible Fuel
|
Ethanol E85 (ASTM D5798)
|
24.6 Gallons
|
93.0 Liters
|
—
|
—
|
Fuel Selection (5.7L
Engine)
|
89 Octane Recommended
- 87 Octane Acceptable, 0-15% Ethanol.
|
24.6 Gallons
|
93.0 Liters
|
—
|
—
|
Fuel Selection (5.7L
Engine - Europe)
|
Minimum 91 Octane Acceptable
- 95 Octane Recommended
|
24.6 Gallons
|
93.0 Liters
|
—
|
—
|
Fuel Selection (6.4L
Engine)
|
Premium Unleaded 91 Octane Only or Higher, 0-15% Ethanol.
|
24.6 Gallons
|
93.0 Liters
|
—
|
—
|
Fuel Selection (6.4L
Engine – Export)
|
Research Octane Number (RON) of 98 or higher.
|
24.6 Gallons
|
93.0 Liters
|
—
|
—
|
Diesel Exhaust Fluid
(DEF)
|
MOPAR Diesel Exhaust Fluid
(API Certified) (DEF) or equivalent that has been API Certified to
the ISO 22241 standard. Use of fluids not API Certified to ISO 22241
may result in system damage.
|
8 Gallons
|
30.3 Liters
|
68035704AC
|
—
|
A/C Refrigerant System
|
A/C Refrigerant
|
R-134a
|
1.438 Pounds
|
652 Grams
|
68234974AA
|
82300101GB
|
A/C Refrigerant
|
R-1234yf
|
1.25 Pounds
|
567 Grams
|
68234971AC
|
68224028GA
|
♦ System fill capacity
includes heater and coolant recovery bottle filled to MAX level.
|
♦♦ SAE 5W-30 engine oil
approved to 9.55535 may be used when SAE 5W-20 engine oil is not available
MOPARŪ SAE 5W-30 engine oil approved to MS-6395 such as PennzoilŪ
or Shell HelixŪ may be used when SAE 5W-20 engine oil meeting MS-6395
is not available.
|
♦♦♦ Vehicles equipped
with a 5.7L engine must use SAE 5W-20 oil. Failure to do so may result
in improper operation of the Fuel Saver Technology.
|
CAUTION: |
Nominal refill capacities are
shown. A variation may be observed from vehicle to vehicle due to
manufacturing tolerance and refill procedure.
|
|