SPECIFICATIONS


3.0L Diesel Engine

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter 8 Quarts / 7.7 Liters We recommend you use 5W-40 synthetic engine oil such as Mopar that meets FCA Material Standard MS-10902 or FCA 9.55535-D3 and the ACEA A3/B4 or API CJ-4/SM engine oil category is required. SELENIA SPORT SAE 5W-40 synthetic engine oil, or equivalent, that meets FCA Material Standard 9.55535-Z2 and the ACEA A3/B4 should be used when recommended oil is not available. We recommend you use Mopar Engine Oil Filters. 68001332PB 68001332GB
Cooling System * 12 Quarts / 11.4 Liters We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology). 68163848AB 68163848GB
Fuel Selection 24.6 Gallons / 93 Liters Use good quality diesel fuel from a reputable supplier in your vehicle. Federal law requires that you must fuel this vehicle with Ultra Low Sulfur Highway Diesel fuel (15 ppm Sulfur maximum) and prohibits the use of Low Sulfur Highway Diesel fuel (500 ppm Sulfur maximum) to avoid damage to the emissions control system. For most year-round service, No. 2 diesel fuel meeting ASTM specification D-975 Grade S15 will provide good performance. We recommend you use a blend of up to 5% biodiesel, meeting ASTM specification D-975 with your diesel engine. This vehicle is compatible with biodiesel blends greater than 5% but no greater than 20% biodiesel meeting ASTM specification D-7467 provided the shortened maintenance intervals are followed as directed. We recommend you use Mopar Fuel Filter. Must meet 3 micron rating. Using a fuel filter that does not meet the manufacturers filtration and water separating requirements can severely impact fuel system life and reliability.

NOTE: If the vehicle is exposed to extreme cold (below 20°F or -7°C), or is required to operate at colder-than-normal conditions for prolonged periods, use climatized No. 2 diesel fuel or dilute the No. 2 diesel fuel with 50% No. 1 diesel fuel. This will provide better protection from fuel gelling or wax-plugging of the fuel filters.
Diesel Exhaust Fluid (DEF) 8 Gallons / 30.3 Liters Mopar Diesel Exhaust Fluid (API Certified) (DEF) or equivalent that has been API Certified to the ISO 22241 standard. Use of fluids not API Certified to ISO 22241 may result in system damage. 68035704AC
* Includes heater and coolant reservoir filled to MAX level.

3.0L Gas Engine

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter 6 Quarts / 5.6 Liters We recommend you use API Certified SAE 5W- 20 engine oil, such as Mopar, Pennzoil, Shell Helix or equivalent meeting the requirements of FCA Material Standard MS-6395 or FCA 9.55535-CR1. Refer to your engine oil filler cap for the correct SAE grade. We recommend you use MOPAR Engine Oil Filters. 68218890AB 68218890GB
Cooling System * 10.4 Quarts / 9.9 Liters We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology). 68163848AB 68163848GB
Fuel Selection 24.6 Gallons / 93 Liters Minimum 91 Octane.
Spark Plugs GAP We recommend you use MOPAR Spark Plugs.
.043 in / 1.10 mm
* Includes heater and coolant reservoir filled to MAX level.

3.6L Engine

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter 6 Quarts / 5.6 Liters We recommend you use API Certified SAE 0W-20 Engine Oil, meeting the requirements of FCA Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. We recommend you use MOPAR Engine Oil Filters. 68218950AB 68218950GA
Cooling System * 10.4 Quarts / 9.9 Liters We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology). 68163848AB 68163848GB
Fuel Selection 24.6 Gallons / 93 Liters 87 Octane (R+M)/2 Method, 0-15% Ethanol (Do Not Use E-85).
Spark Plugs GAP We recommend you use MOPAR Spark Plugs.
.043 in / 1.10 mm
* Includes heater and coolant reservoir filled to MAX level.

5.7L Engine

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter 7 Quarts / 6.6 Liters We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of FCA Material Standard MS-6395 such as MOPAR, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for correct SAE grade. We recommend you use MOPAR Engine Oil Filters. 68218890AB 68218890GB
Cooling System * 15.4 Quarts / 14.6 Liters We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology). 68163848AB 68163848GB
Cooling System – With Trailer Tow Package * 16 Quarts / 15.2 Liters We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology). 68163848AB 68163848GB
Fuel Selection 24.6 Gallons / 93 Liters 89 Octane Recommended - 87 Octane Acceptable, 0-15% Ethanol (Do Not Use E-85).
Spark Plugs GAP We recommend you use MOPAR Spark Plugs.
.043 in / 1.1 mm
* Includes heater and coolant reservoir filled to MAX level.

6.2L Engine

Description Capacities Type Part Number Global Part Number
Engine Oil with Filter & Drained Cooler 8.3 Quarts / 7.8 Liters For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils. The manufacturer recommends the use of Pennzoil Ultra 0W-40 or equivalent MOPAR engine oil meeting the requirements of FCA Material Standard MS- 12633 for use in all operating temperatures. We recommend you use MOPAR Engine Oil Filters. 68171066PB 68171066GA
Cooling System * 14.7 Quarts / 13.9 Liters Intercooler 4.0 Quarts / 3.9 Liters Engine/Intercooler Coolant We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT coolant conforming to MS.90032. 68163848AB 68163848GB
Fuel Selection 24.6 Gallons / 93 Liters Premium Unleaded 91 Octane (R+M)/2 Method Only or Higher, 0-15% Ethanol (Do Not Use E-85).
Fuel Selection – Export 24.6 Gallons / 93 Liters Research Octane Number (RON) of 98 or higher.
Spark Plugs GAP We recommend you use MOPAR Spark Plugs.
.031 in / 0.80 mm
* Includes heater and coolant reservoir filled to MAX level.

6.4L Engine

Description Capacities Type Part Number Global Part Number
Engine Oil With Filter 7 Quarts / 6.6 Liters For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils. The manufacturer recommends the use of Pennzoil Ultra 0W-40 or equivalent MOPAR engine oil meeting the requirements of FCA Material Standard MS-12633 for use in all operating temperatures. We recommend you use MOPAR Engine Oil Filters. 68171066PB 68171066GA
Cooling System * 16 Quarts / 15.5 Liters We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT coolant conforming to MS.90032. 68163848AB 68163848GB
Fuel Selection 24.6 Gallons / 93 Liters Premium Unleaded 91 Octane (R+M)/2 Method Only or Higher, 0-15% Ethanol (Do Not Use E-85).
Fuel Selection – Export 24.6 Gallons / 93 Liters Research Octane Number (RON) of 98 or higher.
Spark Plugs GAP We recommend you use MOPAR Spark Plugs.
.043 in / 1.10 mm
* Includes heater and coolant reservoir filled to MAX level.

A/C Refrigerant System
A/C Refrigerant R-134a 1.375 Pounds 623.7 Grams 82300101AC 82300101GB
A/C Refrigerant R-1234yf 1.25 Pounds 567 Grams 68224028AB 68224028GA

TRANSMISSION

Description Type Capacities Part Number Global Part Number
U.S. Metric
Automatic
HP50 – 8 Speed Use only MoparŪ ZF 8&9 Speed ATF™ Automatic Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. 9.5 Quarts 9 Liters 68218925AA 68218925GA
HP70 – 8 Speed Use only MoparŪ ZF 8&9 Speed ATF™ Automatic Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. 8.77 Quarts 8.3 Liters 68218925AA 68218925GA
HP75 – 8 Speed Use only MoparŪ ZF 8&9 Speed ATF™ Automatic Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. 8.98 Quarts 8.5 Liters 68218925AA 68218925GA
HP95 – 8 Speed Use only MoparŪ ZF 8&9 Speed ATF™ Automatic Transmission Fluid or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission. 9.5 Quarts 9 Liters 68218925AA 68218925GA
♦ Dry fill capacity. Depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary. Refer to the appropriate service information for the correct procedures.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


TRANSFER CASE

Description Type Capacities Part Number Global Part Number
U.S. Metric
MP2010 We recommend you use Automatic Transmission Fluid 3353. 1.1 Pints 0.51 Liters 05127382AB 05127382GB
MP3010 MOPARŪ ATF+4 Automatic Transmission Fluid 1.4 Quarts 1.35 Liters 68218057AC 68218057GD
MP3015 MOPARŪ ATF+4 Automatic Transmission Fluid 1.1 Quarts 1 Liter 68218057AC 68218057GD
MP3023 MOPARŪ ATF+4 Automatic Transmission Fluid 2.0 Quarts 1.9 Liters 68218057AC 68218057GD

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.


CHASSIS

Description Type Capacities Part Number Global Part Number
U.S. Metric
Axles (Front)
195FIA FE - Front Axle We recommend you use MOPAR GL-5 Synthetic Axle Lubricant SAE 75W-85. 0.9 Quarts 0.8 Liters 68232947AA 68232947GA
Axles (Rear)
195RIA - Rear Axle (Aluminum) We recommend you use MOPAR GL-5 Synthetic Axle Lubricant SAE 75W-85. 1.0 Quarts 0.9 Liters 68232947AA 68232947GA
230RIA With Electronic Limited-Slip Differential (ELSD)-Rear Axle (Aluminum) We recommend you use MOPAR GL-5 Synthetic Axle Lubricant SAE 75W-85 with friction modifier additive. 1.4 Quarts 1.3 Liters 68083381AA 68083381GA
230RIA Without Electronic Limited-Slip Differential (ELSD) - Rear Axle (Aluminum) We recommend you use MOPAR GL-5 Synthetic Axle Lubricant SAE 75W-85. 1.2 Quarts 1.1 Liters 68232947AA 68232947GA
Chassis Systems
Brake Master Cylinder We recommend you use MOPAR DOT 3 Brake Fluid, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. N/A N/A 04318080AD 04318080GC
♦ Power Steering Reservoir (Belt Driven Pump) MOPARŪ Power Steering Fluid +4 N/A N/A 68218064AB 68218064GB
Power Steering Reservoir (Electric Pump) MOPARŪ Hydraulic Fluid meeting the requirements of Material Standard MS-11655 N/A N/A 68088485AB 68088485GA
♦ If MOPARŪ Power Steering Fluid +4 is not available, then MOPARŪ ATF +4 Automatic Transmission Fluid, is acceptable.

CAUTION: There is an Electro-Hydraulic Power Steering (EHPS) pump on some vehicles requiring a different fluid. Do not mix power steering fluid types. Damage may result to the power steering pump and system if any other fluid is used. The mechanical power steering pump systems on this vehicle require the use of Power Steering Fluid +4, which meets material specification MS-9602 or equivalent. The EHPS system uses fluid which meets material specification MS-11655 or equivalent. Do not overfill.

CAUTION: Nominal refill capacities are shown. A variation may be observed from vehicle to vehicle due to manufacturing tolerance and refill procedure.